Mesoscale modeling of S-2 Glass/SC-15 epoxy composites: 3D-weave architecture
- 28 July 2016
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 50 (24) , 3431-3443
Abstract
The addition of Z-yarns to an S-2 glass composite can increase the material's resistance to interlayer delamination and damage. However, the presence of the Z-yarns also complicates the resulting constitutive behavior, as multiple individual failure mechanisms (e.g. yarn/matrix delamination, yarn breakage) may occur before the overall ultimate failure of the composite is reached. A mesoscale model of a 3D-weave composite was created to provide insights into these processes. Material models for the yarns, matrix, and interfaces were previously developed for a similar plain-weave composite. These were combined with a complicated unit cell geometry that could be used to construct specimen meshes that closely matched the physical characteristics of the 3D-weave composite. Numerical simulations conducted using this model can reproduce most aspects of the load–displacement curves and the observed failure mechanisms from tension, torsion, and delamination tests.Keywords
This publication has 13 references indexed in Scilit:
- Z-fiber influence on high speed penetration of 3D orthogonal woven fiber compositesMechanics of Materials, 2014
- Influence of crimp on 3D-woven fibre reinforced compositesComposite Structures, 2013
- Multi-hit ballistic impact on S-2 glass/SC15 thick-section composites: finite element analysesThe Journal of Strain Analysis for Engineering Design, 2012
- Ballistic Protection for Ground Vehicles, Human Personnel, and Habitats2010
- A comparative study of tensile properties of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass composites. Part 1: Materials, methods and principal resultsComposites Part A: Applied Science and Manufacturing, 2009
- Ballistic Resistance of 2D and 3D Woven Sandwich CompositesJournal of Sandwich Structures & Materials, 2007
- Composites in ArmorScience, 2006
- Low-velocity impact damage accumulation in woven S2-glass composite systemsComposites Science and Technology, 2006
- Performance Metrics for Composite Integral ArmorJournal of Thermoplastic Composite Materials, 2000
- On the tensile failure of 3D woven compositesComposites Part A: Applied Science and Manufacturing, 1996