Thermal shock effect on Mechanical and Physical properties of pre-moisture treated GRE composite
Open Access
- 1 March 2018
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 338 (1) , 012047
Abstract
Many practical situations may be encountered under which a GFRP (Glass fibre reinforced polymer) composite, during its service life, is exposed to the severities of sudden temperature fluctuations. Moisture absorption of GRE (Glass fibre reinforced epoxy) composites followed by various gradients of temperature fluctuations may cause thermo- mechanical degradation. It is on this context, the hand layed GRE composite samples are exposed to up-thermal shock (-40°C to +50°C) and down-thermal shock (+50°C to -40°C) for various time interval after several periods of moisture (hydrothermal/hygrothermal) conditioning. The thermally shocked GRE specimens are put to 3-point bend test to divulge inter laminar shear strength (ILSS). Least ILSS values are recorded for the samples with maximum period of moisture treatments under with both up-thermal and down-thermal shock conditions. Lower glass transition temperature (Tg) values, as revealed through the low temperature DSC test, are exhibited at maximum durations of both up-thermal and down-thermal shock for the samples with higher periods of hygrothermal/hydrothermal treatments. SEM fractographs of representative GRE specimens after optimum period of moisture treatments and thermal shock show the various modes of failures.Keywords
This publication has 21 references indexed in Scilit:
- Evaluation on material behaviors of pultruded glass fiber reinforced polymer (GFRP) laminatesComposite Structures, 2017
- An experimental and finite element investigation of the ballistic performance of laminated GFRP composite targetComposites Part B: Engineering, 2017
- Influence of hydrothermal ageing on the compressive behaviour of glass fibre/epoxy composite pipesComposite Structures, 2017
- Improving the strength and service life of jute/epoxy laminar composites for structural applicationsComposite Structures, 2016
- Burst strength and impact behaviour of hydrothermally aged glass fibre/epoxy composite pipesMaterials & Design, 2016
- Sea Water Ageing of GFRP Composites and the Dissolved saltsIOP Conference Series: Materials Science and Engineering, 2015
- Environmental stability of GFRP laminated composites: an emphasis on mechanical behaviourAircraft Engineering and Aerospace Technology, 2010
- The influence of long term water immersion ageing on impact damage behaviour and residual compression strength of glass fibre reinforced polymer (GFRP)Materials & Design (1980-2015), 2008
- Long-Term Deterioration of GFRP in Water and Moist EnvironmentJournal of Composites for Construction, 2002
- Effect of Aqueous Environment and Temperature on Glass-Fibre Epoxy Resin CompositesJournal of Reinforced Plastics and Composites, 2000