Ananta Prasad Chakraverty
Research Subjects
Ananta Prasad Chakraverty has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
B. B. Biswal
Director, National Institute of Technology, Maghalaya-793003, Meghalaya, India
4 shared publicationsS. C. Mishra
Department of Metallurgical and Materials Engineering, National Institute of Technology, Rourkela-769008, Odisha, India
4 shared publicationsU. K. Mohanty
Department of Metallurgical and Materials Engineering, National Institute of Technology, Rourkela-769008, Odisha, India
4 shared publicationsS. Beura
3 shared publicationsU.K. Mohanty
3 shared publications- Upendra Kumar Mohanty
Department of Mechanical Engineering, ITER, Sikhya O Anusandhan (SOA) University, Bhubaneswar, India
3 shared publications
Latest Publications
- 2 February 2024
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
Mechanothermal assessment of outdoors aged hybrid glass fibre reinforced polymer composite filled with fly ash as industrial waste
Industrial fly ash impregnated glass fibre reinforced polymer (GFRP) composites were examined to assess their overall characteristics in adverse ambient conditions, keeping in mind that use of filler materials in FRP composites was expected to enhance the strength properties of the material. GFRP composite specimens with 2–10 wt % industrial fly ash were fabricated in the laboratory. These were exposed to open ambient ageing for 120 days. The samples impregnated with 8 wt % fly ash and aged for 120 days were seen to absorb the minimum moisture and exhibited the maximum ILSS of 35.19 MPa and flexural strength of 690 MPa, respectively. These samples also exhibited the highest Tg of 101.53°C as revealed through low temperature DSC. It was also observed that the 8 wt% fly ash containing samples aged in the open for 120 days showed the ILSS to be 5.83% higher and Tg to be 21.95% higher as compared to the unaged GFRP samples without fly ash. FTIR spectra confirm the trend of thermo-mechanical properties. Both optical and scanning electron microscopy of the fractured surfaces of the test samples revealed the modes of mechanical failure of the hybrid GFRP composite with their indicative properties at optimized extent of fly ash dispersion.
- 2 February 2024
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
Mechanothermal assessment of outdoors aged hybrid glass fibre reinforced polymer composite filled with fly ash as industrial waste
Industrial fly ash impregnated glass fibre reinforced polymer (GFRP) composites were examined to assess their overall characteristics in adverse ambient conditions, keeping in mind that use of filler materials in FRP composites was expected to enhance the strength properties of the material. GFRP composite specimens with 2–10 wt % industrial fly ash were fabricated in the laboratory. These were exposed to open ambient ageing for 120 days. The samples impregnated with 8 wt % fly ash and aged for 120 days were seen to absorb the minimum moisture and exhibited the maximum ILSS of 35.19 MPa and flexural strength of 690 MPa, respectively. These samples also exhibited the highest Tg of 101.53°C as revealed through low temperature DSC. It was also observed that the 8 wt% fly ash containing samples aged in the open for 120 days showed the ILSS to be 5.83% higher and Tg to be 21.95% higher as compared to the unaged GFRP samples without fly ash. FTIR spectra confirm the trend of thermo-mechanical properties. Both optical and scanning electron microscopy of the fractured surfaces of the test samples revealed the modes of mechanical failure of the hybrid GFRP composite with their indicative properties at optimized extent of fly ash dispersion.
- 19 November 2020
- Published by SAGE Publications in Polymers and Polymer Composites
- Vol. 29 (9) , 1485-1494
Stability of GFRP composites with varied fractions of reinforcement exposed to ageing processes outdoors
The effects of outdoor ageing on various compositions of glass fibre reinforced plastic (GFRP) composites were studied. Changes in the interlaminar shear strength (ILSS) of hand-laid samples with 50–60 wt.% of fibre were determined by three-point bending and glass transition temperature (Tg) measurements. SEM analysis was carried out for exploring the mode of failure. The moisture ingress rate and extent were concentration-dependent at first, but became increasingly dependent on the fibre-matrix interfacial area. The ILSS initially fluctuated and then showed a decreasing trend with time, especially for the higher fibre concentrations. ILSS variations were zigzag initially and showed a lowering trend after the initial periods. Rate of lowering of ILSS was the highest for samples with the highest fraction reinforcement. Weight fraction reinforcement didn’t have any significant effect on the Tg variations. SEM fractograph revealed excessive fracture and fragmentation for the composite samples with the highest weight percentage reinforcement.
- 19 November 2020
- Published by SAGE Publications in Polymers and Polymer Composites
- Vol. 29 (9) , 1485-1494
Stability of GFRP composites with varied fractions of reinforcement exposed to ageing processes outdoors
The effects of outdoor ageing on various compositions of glass fibre reinforced plastic (GFRP) composites were studied. Changes in the interlaminar shear strength (ILSS) of hand-laid samples with 50–60 wt.% of fibre were determined by three-point bending and glass transition temperature (Tg) measurements. SEM analysis was carried out for exploring the mode of failure. The moisture ingress rate and extent were concentration-dependent at first, but became increasingly dependent on the fibre-matrix interfacial area. The ILSS initially fluctuated and then showed a decreasing trend with time, especially for the higher fibre concentrations. ILSS variations were zigzag initially and showed a lowering trend after the initial periods. Rate of lowering of ILSS was the highest for samples with the highest fraction reinforcement. Weight fraction reinforcement didn’t have any significant effect on the Tg variations. SEM fractograph revealed excessive fracture and fragmentation for the composite samples with the highest weight percentage reinforcement.
- 19 February 2020
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 978, 296-303
Gamma-Irradiation of E-Glass/Epoxy Composite: A Study of its Mechanical and Thermal Sustainability
Glass fibre reinforced epoxy (GRE) composites, used as mechanical support and thermal insulators for superconducting magnets of fusion reactors, have been exposed to gamma irradiations at both higher and lower order ranges of doses. Hand layed E-glass fibre/epoxy composite samples, exposed to gamma-irradiations of cumulative doses of both low strength (10, 20, 30, 40, 50 and 60 kGy) and high strength (0.5, 2.5, 6.5, 8.5 and 10.5 MGy) reveal a huge lowering of the ILSS (inter laminar shear strength) for its exposure to low strength dose irradiation. However, improved ILSS values are recorded for high dose exposures. At both high and low doses of exposure to irradiation the Tg (glass transition temperature) got improved initially with a decreasing trend towards the later stages of exposures. Thermo-gravimetric analysis (TGA) test reveals lowest initial decomposition temperature (IDT) for the composite sample irradiated to maximum dose (10.5 MGy). Activation energy () values of gamma-irradiated composite samples for thermal decomposition were found less compared to that for as-cured composite. FTIR spectra of irradiated samples reveal formation of oligomers confirming the trend of activation energy of irradiated composite. FESEM fractographs of the irradiated composite fracture samples reveal several modes of failure.
- 19 February 2020
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 978, 296-303
Gamma-Irradiation of E-Glass/Epoxy Composite: A Study of its Mechanical and Thermal Sustainability
Glass fibre reinforced epoxy (GRE) composites, used as mechanical support and thermal insulators for superconducting magnets of fusion reactors, have been exposed to gamma irradiations at both higher and lower order ranges of doses. Hand layed E-glass fibre/epoxy composite samples, exposed to gamma-irradiations of cumulative doses of both low strength (10, 20, 30, 40, 50 and 60 kGy) and high strength (0.5, 2.5, 6.5, 8.5 and 10.5 MGy) reveal a huge lowering of the ILSS (inter laminar shear strength) for its exposure to low strength dose irradiation. However, improved ILSS values are recorded for high dose exposures. At both high and low doses of exposure to irradiation the Tg (glass transition temperature) got improved initially with a decreasing trend towards the later stages of exposures. Thermo-gravimetric analysis (TGA) test reveals lowest initial decomposition temperature (IDT) for the composite sample irradiated to maximum dose (10.5 MGy). Activation energy () values of gamma-irradiated composite samples for thermal decomposition were found less compared to that for as-cured composite. FTIR spectra of irradiated samples reveal formation of oligomers confirming the trend of activation energy of irradiated composite. FESEM fractographs of the irradiated composite fracture samples reveal several modes of failure.
- 1 February 2020
- Published by Elsevier in Composites Communications
- Vol. 17, 42-50
A novel investigation on durability of GRE composite pipe for prolonged sea water transportation
- 1 February 2020
- Published by Elsevier in Composites Communications
- Vol. 17, 42-50
A novel investigation on durability of GRE composite pipe for prolonged sea water transportation
- 1 January 2020
- Published by Elsevier in Materials Today: Proceedings
- Vol. 22, 3082-3088
Characterization of Plasma Cured E-Glass-Epoxy composite
- 1 January 2020
- Published by Elsevier in Materials Today: Proceedings
- Vol. 22, 3082-3088
Characterization of Plasma Cured E-Glass-Epoxy composite
- 1 June 2019
- Published by Elsevier in Composites Communications
- Vol. 13, 22-29
Durability of GFRP composite exposed to outdoors weathering
- 1 June 2019
- Published by Elsevier in Composites Communications
- Vol. 13, 22-29
Durability of GFRP composite exposed to outdoors weathering
- Open Access
- 1 March 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 338 (1) , 012047
Thermal shock effect on Mechanical and Physical properties of pre-moisture treated GRE composite
Many practical situations may be encountered under which a GFRP (Glass fibre reinforced polymer) composite, during its service life, is exposed to the severities of sudden temperature fluctuations. Moisture absorption of GRE (Glass fibre reinforced epoxy) composites followed by various gradients of temperature fluctuations may cause thermo- mechanical degradation. It is on this context, the hand layed GRE composite samples are exposed to up-thermal shock (-40°C to +50°C) and down-thermal shock (+50°C to -40°C) for various time interval after several periods of moisture (hydrothermal/hygrothermal) conditioning. The thermally shocked GRE specimens are put to 3-point bend test to divulge inter laminar shear strength (ILSS). Least ILSS values are recorded for the samples with maximum period of moisture treatments under with both up-thermal and down-thermal shock conditions. Lower glass transition temperature (Tg) values, as revealed through the low temperature DSC test, are exhibited at maximum durations of both up-thermal and down-thermal shock for the samples with higher periods of hygrothermal/hydrothermal treatments. SEM fractographs of representative GRE specimens after optimum period of moisture treatments and thermal shock show the various modes of failures.
- 1 March 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 338 (1) , 012047
Open AccessThermal shock effect on Mechanical and Physical properties of pre-moisture treated GRE composite
Many practical situations may be encountered under which a GFRP (Glass fibre reinforced polymer) composite, during its service life, is exposed to the severities of sudden temperature fluctuations. Moisture absorption of GRE (Glass fibre reinforced epoxy) composites followed by various gradients of temperature fluctuations may cause thermo- mechanical degradation. It is on this context, the hand layed GRE composite samples are exposed to up-thermal shock (-40°C to +50°C) and down-thermal shock (+50°C to -40°C) for various time interval after several periods of moisture (hydrothermal/hygrothermal) conditioning. The thermally shocked GRE specimens are put to 3-point bend test to divulge inter laminar shear strength (ILSS). Least ILSS values are recorded for the samples with maximum period of moisture treatments under with both up-thermal and down-thermal shock conditions. Lower glass transition temperature (Tg) values, as revealed through the low temperature DSC test, are exhibited at maximum durations of both up-thermal and down-thermal shock for the samples with higher periods of hygrothermal/hydrothermal treatments. SEM fractographs of representative GRE specimens after optimum period of moisture treatments and thermal shock show the various modes of failures.
- 6 February 2018
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 37 (8) , 533-547
Impact of the ambiance on GFRP composites and role of some inherent factors: A review report
A composite material scores over its metallic counter parts in many aspects and can be tailor-made to suit the specific purpose for which it is conceived. However, during functioning the composite is exposed to the severities of the surrounding ambiance and is damaged and degraded by the atmospheric deterrent-reagents like moisture and heat fluctuations. In order to ensure a safe, extended service life-span of the composite material, it is, therefore, pertinent that the behaviour of the material related to its physical, chemical and mechanical characteristics must be analysed and established under different fluctuating ambient conditions. The present report aims at analysing and presenting the degradation/damages caused to the glass-fibre reinforced plastic (GFRP) composites under different ambient conditions and the role played by some inherent factors like the constituent components of the GFRP composites, its pre-existing flaws created during manufacturing/service-life, volume fraction fibres, length and distribution of the fibres in the matrix phase and the curing processes adopted for strengthening and stabilising the matrix structure.
- 6 February 2018
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 37 (8) , 533-547
Impact of the ambiance on GFRP composites and role of some inherent factors: A review report
A composite material scores over its metallic counter parts in many aspects and can be tailor-made to suit the specific purpose for which it is conceived. However, during functioning the composite is exposed to the severities of the surrounding ambiance and is damaged and degraded by the atmospheric deterrent-reagents like moisture and heat fluctuations. In order to ensure a safe, extended service life-span of the composite material, it is, therefore, pertinent that the behaviour of the material related to its physical, chemical and mechanical characteristics must be analysed and established under different fluctuating ambient conditions. The present report aims at analysing and presenting the degradation/damages caused to the glass-fibre reinforced plastic (GFRP) composites under different ambient conditions and the role played by some inherent factors like the constituent components of the GFRP composites, its pre-existing flaws created during manufacturing/service-life, volume fraction fibres, length and distribution of the fibres in the matrix phase and the curing processes adopted for strengthening and stabilising the matrix structure.
- Open Access
- 1 February 2017
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 178 (1) , 012013
Effect of Hydrothermal immersion and Hygrothermal Conditioning on Mechanical Properties of GRE Composite
- 1 February 2017
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 178 (1) , 012013
Open AccessEffect of Hydrothermal immersion and Hygrothermal Conditioning on Mechanical Properties of GRE Composite
- Open Access
- 1 February 2016
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 115 (1) , 012004
Effect of Post-thermal shock on Prolonged Sea Water aged GFRP Composite
- 1 February 2016
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 115 (1) , 012004
Open AccessEffect of Post-thermal shock on Prolonged Sea Water aged GFRP Composite