Molten Salt-Assisted Catalytic Preparation of MoS2/α-MoO3/Graphene as High-Performance Anode of Li-Ion Battery
Open Access
Abstract
We report on the facile and scalable catalytic conversion of natural graphite and MoS2 minerals into α-MoO3 nanoribbons incorporated into hexagonal MoS2 and graphene nanosheets, and evaluate the structural, morphological and electrochemical performances of the hybrid nanostructured material obtained. Mechanochemical treatment of raw materials, followed by catalytic molten salt treatment leads to the formation of nanostructures with promising electrochemical performances. We examined the effect of processing temperature on the electrochemical performance of the products. At 1100 °C, an excellent Li-ion storage capacity of 773.5 mAh g−1 is obtained after 180 cycles, considerably greater than that of MoS2 (176.8 mAh g−1). The enhanced capacity and the rate performance of this electrode are attributed to the well-integrated components, characterized by the formation of interfacial molybdenum oxycarbide layer during the synthesis process, contributing to the reduced electrical/electrochemical resistance of the sample. This unique morphology promotes the charge and ions transfer through the reduction of the Li-ion diffusion coefficient (1.2 × 10−18 cm2 s−1), enhancing the pseudocapacitive performance of the electrode; 59.3% at the scan rate of 0.5 mV s−1. This article provides a green and low-cost route to convert highly available natural graphite and MoS2 minerals into nanostructured hybrid materials with promising Li-ion storage performance.Keywords
Funding Information
- National Natural Science Foundation of China (52250610222)
This publication has 78 references indexed in Scilit:
- Layer Thinning and Etching of Mechanically Exfoliated MoS2 Nanosheets by Thermal Annealing in AirSmall, 2013
- Molten salt corrosion of graphite as a possible way to make carbon nanostructuresCarbon, 2013
- Correlation between microstructure and thermokinetic characteristics of electrolytic carbon nanomaterialsCorrosion Science, 2012
- On the oxidation of electrolytic carbon nanomaterialsCorrosion Science, 2012
- Phase transformations of Ni-15 wt.% B powders during mechanical alloying and annealingMaterials Letters, 2010
- Thermal conversion of tungsten oxide nanorods to tungsten disulfide nanoflakesJournal of Alloys and Compounds, 2009
- Epitaxial molybdenum oxycarbide thin films synthesized by inductively coupled radio-frequency plasma assisted magnetron sputteringThin Solid Films, 2006
- Supported metal sulphide nanoclusters studied by HAADF-STEMJournal of Microscopy, 2006
- Purification process of natural graphite as anode for Li-ion batteries: chemical versus thermalJournal of Power Sources, 2003
- A possible mechanism for natural graphite formationInternational Journal of Coal Geology, 1982