Effect of Thermal Processing on Surface Roughness of Injection-Molded Denture Base Polymers
Open Access
Abstract
Surface roughness and mechanical performance are critical determinants of the clinical behavior, hygiene, and longevity of denture base materials. This study investigated the influence of two extrusion temperatures—280 °C and 300 °C—on both the surface roughness and compressive strength of ThermoSens thermoplastic polymer specimens over a 7-day immersion period. Surface roughness was evaluated at baseline, 24 h, and 7 days using a contact profilometer, while compressive strength was measured after 7 days following ISO 604 guidelines. Samples processed at 300 °C exhibited a significantly greater reduction in surface roughness over time (28.3%) compared with those processed at 280 °C (18.3%). However, although specimens processed at 300 °C showed a greater percentage reduction, their absolute roughness values remained higher than those processed at 280 °C. Compression testing demonstrated higher strength and modulus values in the 300 °C group (91.6 ± 1.8 MPa; 1887.9 ± 42.3 MPa) compared to the 280 °C group (82.3 ± 2.1 MPa; 1755.4 ± 38.7 MPa). These findings indicate a trade-off between improved mechanical performance at higher processing temperatures and lower surface roughness at lower temperatures, highlighting the need for the careful optimization of processing conditions.Keywords
Funding Information
- European Regional Development Fund (BG16RFPR002-1.014-0005)
This publication has 35 references indexed in Scilit:
- The Effect of Denture Cleansers on the Surface Roughness of Heat-Polymerized Denture Base Resins Polished by Three Different TechniquesThe International Journal of Prosthodontics, 2025
- Microbial adhesion and biofilm formation by Candida albicans on 3D-printed denture base resinsPLOS ONE, 2023
- Surface Characteristics and Microbial Adhesion in Polymethylmethacrylate for Denture Base Submitted to Antimicrobial Agents and Cleaning Agents: A Systematic ReviewEuropean Journal of Prosthodontics and Restorative Dentistry, 2023
- Assessing the physical and mechanical properties of 3D printed acrylic material for denture base applicationDental Materials, 2022
- Flexural Properties and Hardness of CAD‐CAM Denture Base MaterialsJournal of Prosthodontics, 2022
- Development of 3D printed resin reinforced with modified ZrO2 nanoparticles for long-term provisional dental restorationsDental Materials, 2021
- Poly(methyl methacrylate) with TiO 2 nanoparticles inclusion for stereolitographic complete denture manufacturing − the fututre in dental care for elderly edentulous patients?Journal of Dentistry, 2017
- Influence of incorporation of ZrO2 nanoparticles on the repair strength of polymethyl methacrylate denture basesInternational Journal of Nanomedicine, 2016
- Effect of surface roughness on the hydrophobicity of a denture‐base acrylic resin andCandida albicanscolonizationJournal of Investigative and Clinical Dentistry, 2014
- Empowering Malaysian dentists to tobacco dependence treatment conductInternational Dental Journal, 2014