Development of a two‐stage, dual‐Arrhenius rheology model for a high‐performance phenylethynyl‐terminated poly(etherimide)
Authors:
- 1 November 2002
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 42 (11) , 2182-2192
Abstract
A two‐stage, dual‐Arrhenius rheology model was successfully utilized to model the isothermal complex viscosity of a phenylethynyl‐terminated poly(etherimide) as a function of time and temperature over the experimental temperature range of 325°C to 350°C. Union of the dual‐Arrhenius model with a previously developed combination reaction kinetics model provided a chemoviscosity model giving viscosity as a function of degree of cure. A two‐stage, versus a single, dual‐Arrhenius model was used to accommodate a transition in the reaction process from chain growth to branching and network forming that was found to onset around a degree of cure of 0.37. The reduction in chain mobility brought on by branching and networking was quantified by the almost order of magnitude increase in the apparent activation energy for initial viscosity from the chain growth stage to the networking stage. The calculated apparent activation energies for gelation for the first and second stages, 2.14 × 105 J/mol and 2.05 × 105 J/mol, respectively, agree well with results presented elsewhere from differential scanning calorimetry measurements. The experimental procedures followed to obtain the rheological data and the construction of the model from these data are described; the predictions of the model are compared with experimental results.Keywords
This publication has 11 references indexed in Scilit:
- Monitoring the reaction progress of a high‐performance phenylethynyl‐terminated poly(etherlmide). Part II: Advancement of glass transition temperaturePolymer Composites, 2002
- Monitoring the reaction progress of a high‐performance phenylethynyl‐terminated poly(etherimide). Part I: Cure kinetics modelingPolymer Engineering & Science, 2002
- Moisture Sorption Effects on Carbon Fiber-Reinforced Pheny L Ethnyl-Terminated UltemTM CompositesJournal of Thermoplastic Composite Materials, 2000
- Mode I and Mode II fracture toughness of high-performance 3000gmole−1 reactive poly(etherimide)/carbon fiber compositesComposites Part A: Applied Science and Manufacturing, 1999
- Design and characterization of thermosetting polyimide structural adhesive and composite matrix systemsJournal of Polymer Science Part A: Polymer Chemistry, 1997
- Chemorheology of thermosets—an overviewPolymer Engineering & Science, 1996
- Impregnation and Consolidation in Composites Made of GF/PP Powder Impregnated BundlesJournal of Thermoplastic Composite Materials, 1992
- Cure Kinetics and Viscosity of Fiberite 976 ResinJournal of Composite Materials, 1987
- Curing of Epoxy Matrix CompositesJournal of Composite Materials, 1983
- Heat of Reaction, Degree of Cure, and Viscosity of Hercules 3501-6 ResinJournal of Composite Materials, 1982