Synthetic Biofuels by Molten‐Salt Catalytic Conversion: Corrosion of Structural Materials in Ternary Molten Chlorides
Authors:
Open Access
- 22 January 2022
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 24 (7) , 2101453
Abstract
The molten‐salt catalytic conversion of biomass into synthetic fuels is one of the promising renewable energy topics of the 21st century. Mixtures of Zn–Na–K//Cl have gained attention, acting as catalytically active heat transfer fluids in the conversion process, due to their low costs and principally low melting points which effectively lower the required operating temperature in the catalytic reactor. Herein, the corrosion behavior of three candidate steels, SS316L, SS321, and Alloy 800, in the pure molten salt, in a salt–biomass mix, and in a salt–biomass mix containing a corrosion inhibitor (zinc oxide (ZnO)) is comprehensively investigated. The herein described study demonstrates that biomass additions increase the penetration depth of the salt, and the corrosion mechanism leads to partial spalling of the oxide scale. This is attributed to the presence of oxygen and moisture from the biomass leading to the formation of reactive HCl gas. The addition of ZnO reduced the corrosivity of the molten salt–biomass mix, and all alloys obtained a protective, adherent, and thin oxide scale leading to the conclusion that ZnO indeed is an effective corrosion inhibitor for the presented salt system. These findings constitute a major advance in the implementation of molten salt‐catalytic reactors for renewable synthetic fuel production.Keywords
Funding Information
- Horizon 2020 Framework Programme (764089)
This publication has 32 references indexed in Scilit:
- Thermal History of Wood Particles in Molten Salt PyrolysisEnergy & Fuels, 2012
- Review of thermal processing of biomass and waste in molten salts for production of renewable fuels and chemicalsInternational Journal of Low-Carbon Technologies, 2012
- Fast pyrolysis technology developmentBiofuels, Bioproducts and Biorefining, 2010
- Influence of gas phase composition on the kinetics of chloride melt induced corrosion of pure iron (EU-project OPTICORR)Materials and Corrosion, 2006
- Optimisation of in-service performance of boiler steels by modelling high-temperature corrosionMaterials and Corrosion, 2006
- High temperature corrosion of metallic materials in simulated waste incineration environments at 300–600 °CMaterials and Corrosion, 2006
- Overview of Applications of Biomass Fast Pyrolysis OilEnergy & Fuels, 2004
- Renewable fuels and chemicals by thermal processing of biomassChemical Engineering Journal, 2003
- Stability of protective oxide films in waste incineration environment—solubility measurement of oxides in molten chloridesCorrosion Science, 2002
- Pyrolysis of lignins in molten salt mediaIndustrial & Engineering Chemistry Research, 1992