Optimization Study of Biomass Hydrogenation to Ethylene Glycol Using Response Surface Methodology
Open Access
Abstract
Statistical-based study using response surface methodology (RSM) was conducted to study the effects of process parameters towards biomass hydrogenation. Using Malaysian oil palm empty fruit bunches (EFB) fibres as feedstock, the central composite design (CCD) technique was employed and 18 runs were generated by CCD when four parameters (mass ratio of binary catalyst, hydrogen pressure, temperature and mass ratio of catalyst to feedstock) were varied with two center points to determine the effects of process parameters and eventually to get optimum ethylene glycol (EG) yield. RSM with quadratic function was generated for biomass hydrogenation, indicating all factors except temperature, were important in determining EG yield. Analysis of variance (ANOVA) showed a high coefficient of determination (R2) value of >0.98, ensuring a satisfactory prediction of the quadratic model with experimental data. The quadratic model suggested the optimum EG yield should be >25 wt.% and the EG yield results were successfully reproduced in the laboratory.Keywords
This publication has 42 references indexed in Scilit:
- One-pot catalytic conversion of cellulose to ethylene glycol and other chemicals: From fundamental discovery to potential commercializationChinese Journal of Catalysis, 2014
- Catalytic Conversion of Cellulose to Ethylene Glycol over a Low‐Cost Binary Catalyst of Raney Ni and Tungstic AcidChemSusChem, 2013
- One-Pot Conversion of Cellulose to Ethylene Glycol with Multifunctional Tungsten-Based CatalystsAccounts of Chemical Research, 2013
- Conversion of highly concentrated cellulose to 1,2-propanediol and ethylene glycol over highly efficient CuCr catalystsGreen Chemistry, 2013
- Temperature-controlled phase-transfer catalysis for ethylene glycol production from celluloseChemical Communications, 2012
- Nickel‐Promoted Tungsten Carbide Catalysts for Cellulose Conversion: Effect of Preparation MethodsChemSusChem, 2012
- Selective Production of 1,2‐Propylene Glycol from Jerusalem Artichoke Tuber using Ni–W2C/AC CatalystsChemSusChem, 2012
- Transition Metal–Tungsten Bimetallic Catalysts for the Conversion of Cellulose into Ethylene GlycolChemSusChem, 2010
- Catalytic conversion of cellulose into ethylene glycol over supported carbide catalystsCatalysis Today, 2009
- Cover Picture: Direct Catalytic Conversion of Cellulose into Ethylene Glycol Using Nickel‐Promoted Tungsten Carbide Catalysts (Angew. Chem. Int. Ed. 44/2008)Angewandte Chemie International Edition, 2008