Enhanced Infrared Absorbance of the CMOS Compatible Thermopile by the Subwavelength Rectangular-Hole Arrays
Open Access
Abstract
The enhanced infrared absorbance (IRA) of the complementary metal-oxide-semiconductor (CMOS) compatible thermopile with the subwavelength rectangular-hole arrays in active area is investigated. The finite-difference time-domain (FDTD) method considered and analyzed the matrix arrangement (MA) and staggered arrangement (SA) of subwavelength rectangular-hole arrays (SRHA). For the better cases of MA-SRHA and SA-SRHA, the geometric parameters are the same and the infrared absorption efficiency (IAE) of the SA type is better than that of the MA type by about 19.4% at target temperature of 60 °C. Three proposed thermopiles with SA-SRHA are manufactured based on the 0.35 μm 2P4M CMOS-MEMS process. The measurement results are similar to the simulation results. The IAE of the best simulation case of SA-SRHA is up to 3.3 times higher than that without structure at the target temperature of 60 °C. Obviously, the staggered rectangular-hole arrays with more appropriate geometric conditions obtained from FDTD simulation can excellently enhance the IRA of the CMOS compatible thermopile.Keywords
This publication has 18 references indexed in Scilit:
- MEMS-based thermoelectric infrared sensors: A reviewFrontiers of Mechanical Engineering, 2017
- Design of Subwavelength CMOS Compatible Plasmonic Photodetector for Nano-Electronic-Photonic Integrated CircuitsIEEE Photonics Technology Letters, 2012
- Fabrication of an antireflective polymer optical film with subwavelength structures using a roll-to-roll micro-replication processJournal of Micromechanics and Microengineering, 2008
- Non-selective NDIR array for gas detectionSensors and Actuators B: Chemical, 2007
- Review of micromachined thermopiles for infrared detectionMeasurement Science and Technology, 2007
- Overview of calorimeter chips for various applicationsThermochimica Acta, 2005
- Three-dimensional analysis of subwavelength diffractive optical elements with the finite-difference time-domain methodApplied Optics, 2000
- Surface processes in MEMS technologySurface Science Reports, 1998
- A perfectly matched anisotropic absorber for use as an absorbing boundary conditionIEEE Transactions on Antennas and Propagation, 1995
- A perfectly matched layer for the absorption of electromagnetic wavesJournal of Computational Physics, 1994