A facility for the characterisation of planar multilayer structures with preliminary niobium results
Open Access
- 20 July 2022
- journal article
- research article
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 35 (9) , 095004
Abstract
The maximum accelerating gradient of superconducting radio frequency cavities are currently reaching their theoretical limits, due to the magnetic field entering the superconductor in the form of vortices. To overcome these limits, thin film coated superconducting materials are required, however these need to be tested to optimise their properties. A system has been designed, built, and commissioned at Daresbury Laboratory that applies a local DC magnetic field parallel to the surface, from one side of a sample, similar to that in cavity operation. A magnetic flux density (up to 600 mT) is generated parallel to the sample surface in the 2 mm gap of a C-shaped ferrite yoke. Two Hall probe sensors are used to measure both the applied and penetrated magnetic field. The system operates in a cryogen free environment, with a minimum temperature of approximately 2.6 K. A Pb foil has been used to characterise the system, and determine how the sample size affects the results. Nb thin film samples have been tested for varying thickness to determine how the depth effects the field of full flux penetration, B f p . The design, operation, methods of analysis and first results of this facility will be reported in this paper.Keywords
Funding Information
- European Commission’s ARIES collaboration H2020 Research and Innovation Programme (730871)
This publication has 13 references indexed in Scilit:
- Superheating in coated niobiumSuperconductor Science and Technology, 2017
- Unprecedented quality factors at accelerating gradients up to 45 MVm−1in niobium superconducting resonators via low temperature nitrogen infusionSuperconductor Science and Technology, 2017
- Multilayer coating for higher accelerating fields in superconducting radio-frequency cavities: a review of theoretical aspectsSuperconductor Science and Technology, 2016
- Devices for SRF material characterizationSuperconductor Science and Technology, 2016
- Magnesium diboride coated bulk niobium: a new approach to higher acceleration gradientScientific Reports, 2016
- Flux pinning characteristics in cylindrical niobium samples used for superconducting radio frequency cavity fabricationSuperconductor Science and Technology, 2012
- Superconducting Radio-Frequency Fundamentals for Particle AcceleratorsReviews of Accelerator Science and Technology, 2012
- On the reliable determination of the magnetic field for first flux-line penetration in technical niobium materialSuperconductor Science and Technology, 2008
- Enhancement of rf breakdown field of superconductors by multilayer coatingApplied Physics Letters, 2006
- Superconducting Properties of High-Purity NiobiumPhysical Review B, 1966