Effect of indirect restorative material and thickness on light transmission at different wavelengths
- 1 April 2019
- journal article
- research article
- Published by Japan Prosthodontic Society in Journal of Prosthodontic Research
- Vol. 63 (2) , 232-238
Abstract
The aim of this study was to evaluate the influence of indirect restorative material type and thickness on the transmission of different wavelengths from a broad-banded dental curing light. Four dental indirect restorative materials for computer-aided design and computer-aided manufacturing (CAD/CAM) were evaluated: [RC] resin/ceramic hybrid material (Lava Ultimate), [FC] feldspathic ceramic (VitaBlocs), and two zirconia-based ceramics ([ZK] Katana; and [ZL] Lava). Total loss of irradiance (TL) was measured for blue (WB, 425-490nm) and violet (WV, 350-425nm) wavelengths. Specimens of 15×15mm with varying thicknesses (0.5, 1.0, 1.5, and 2.0mm) were fabricated (n=5). A plasma-arc dental light-curing unit was used (Arc Light-II). To assess TL as a function of wavelength, a software (Spectra Suite v5.1) connected to a spectroradiometer (USB2000) and an integrating sphere (CTSM-LSM-60-SF) was used. Data was subjected to statistical analysis (two-way ANOVA and post-hoc Tukey test, α=0.05). A 0.5mm interposition resulted in TL from 50.5 to 67.2%, depending on material. Increased thickness resulted in higher TL for all materials. FC showed less TL compared to ZK. In general, WV showed higher TL than did WB, and WV/WB proportion decreased with increasing thickness. Indirect materials significantly reduced TL, and this effect is greater with increasing thickness. WV showed lower penetration compared to WB.Keywords
Funding Information
- Coordination for the Improvement of Higher Education Personnel (1777-2014)
- National Council for Scientific and Technological Development (307217-2014-0)
This publication has 39 references indexed in Scilit:
- Resin composite—State of the artDental Materials, 2011
- State-of-the-art: Dental photocuring—A reviewDental Materials, 2011
- Irradiance Uniformity and Distribution from Dental Light Curing UnitsJournal of Esthetic and Restorative Dentistry, 2010
- Effect of delivering light in specific narrow bandwidths from 394 to 515 nm on the micro-hardness of resin compositesDental Materials, 2009
- Bracket bond strength dependence on light power densityJournal of Dentistry, 2006
- Molar extinction coefficients and the photon absorption efficiency of dental photoinitiators and light curing unitsJournal of Dentistry, 2005
- Laser Rayleigh scatteringMeasurement Science and Technology, 2001
- Photoinitiators for UV and visible curing of coatings: Mechanisms and propertiesJournal of Photochemistry and Photobiology A: Chemistry, 1996
- Analysis of optical transmission by 400–500 nm visible light into aesthetic dental biomaterialsJournal of Dentistry, 1994
- Translucency of Dental PorcelainsJournal of Dental Research, 1980