Field investigations into the performance of magnetic track brakes of an electrical multiple unit against slippery tracks. Part 2: Braking force and side effects
Authors:
- 25 July 2011
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
- Vol. 226 (1) , 72-94
Abstract
Part II of the field investigations focuses on the braking force and some possible side effects of the frequent use of magnetic track brakes (MTBs) against slippery tracks. In part I, the adhesion recovery using MTBs along contaminated rails has been presented. Field tests have been performed with the permanent MTB of an electrical multiple unit (EMU) in a stabling yard. Three types of contamination representative of slippery tracks have been employed, e.g. water, leaves, and grease. Tests with dry ‘clean’ rails have also been performed throughout the testing to obtain a reference of the braking force in the speed range 0–40 km/h. Furthermore, the braking performance of the EMU in different braking modes is analysed under the tested conditions. The surfaces of the brake shoes and the rails have been examined to analyse possible changes during the testing. The profile of rails and the mass loss of the brake shoes have also been measured in the tests to quantify the wear caused in the tests. Moreover, the possible negative effect of a passing MTB on the electrical insulation of an insulated rail joint has been examined by means of electrical measurements and visual inspection.Keywords
This publication has 13 references indexed in Scilit:
- Simulation of curving behaviour under high traction in lubricated wheel–rail contactsVehicle System Dynamics, 2010
- Influence of hardness of the harder body on wear regime transition in a sliding pair of steelsWear, 2009
- Twin disc assessment of wheel/rail adhesionWear, 2008
- Friction and wear of several kinds of cast irons under severe sliding conditionsWear, 2007
- Study on the Factors Which Cause the Wheel Skidding of JR Ltd. Express EMUsJSME International Journal Series C, 2004
- Investigation of tribological properties of brake shoe materials — phosphorous cast irons with different graphite morphologiesWear, 1993
- The unlubricated sliding wear of steels: The role of the hardness of the friction pairWear, 1993
- Sliding friction and wear of metals in vacuumWear, 1991
- Wear of metals at high sliding speedsWear, 1977
- Smoothing and Differentiation of Data by Simplified Least Squares Procedures.Analytical Chemistry, 1964