The application of advanced oxidation technologies to the treatment of effluents from the pulp and paper industry: a review
- 5 September 2014
- journal article
- review article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 22 (1) , 168-191
Abstract
The paper industry is adopting zero liquid effluent technologies to reduce freshwater use and meet environmental regulations, which implies closure of water circuits and the progressive accumulation of pollutants that must be removed before water reuse and final wastewater discharge. The traditional water treatment technologies that are used in paper mills (such as dissolved air flotation or biological treatment) are not able to remove recalcitrant contaminants. Therefore, advanced water treatment technologies, such as advanced oxidation processes (AOPs), are being included in industrial wastewater treatment chains aiming to either improve water biodegradability or its final quality. A comprehensive review of the current state of the art regarding the use of AOPs for the treatment of the organic load of effluents from the paper industry is herein addressed considering mature and emerging treatments for a sustainable water use in this sector. Wastewater composition, which is highly dependent on the raw materials being used in the mills, the selected AOP itself, and its combination with other technologies, will determine the viability of the treatment. In general, all AOPs have been reported to achieve good organic removal efficiencies (COD removal >40 %, and about an extra 20 % if AOPs are combined with biological stages). Particularly, ozonation has been the most extensively reported and successfully implemented AOP at an industrial scale for effluent treatment or reuse within pulp and paper mills, although Fenton processes (photo-Fenton particularly) have actually addressed better oxidative results (COD removal ≈ 65–75 %) at a lab scale, but still need further development at a large scale.Keywords
This publication has 132 references indexed in Scilit:
- Removal of AOX, total nitrogen and chlorinated lignin from bleached Kraft mill effluents by UV oxidation in the presence of hydrogen peroxide utilizing TiO2 as photocatalystEnvironmental Science and Pollution Research, 2008
- Treatment of paper pulp and paper mill wastewater by coagulation–flocculation followed by heterogeneous photocatalysisJournal of Photochemistry and Photobiology A: Chemistry, 2008
- Comparison of the efficacy of oxidative processes and flocculation for the removal of colour from Eop effluentWater Science & Technology, 2007
- Study of catalyzed ozonation for advanced treatment of pulp and paper mill effluentsWater Research, 2006
- Early stages in the TiO2-photocatalyzed degradation of simple phenolic and non-phenolic lignin model compoundsJournal of Photochemistry and Photobiology A: Chemistry, 2004
- Ozonation of Pulp Mill Effluent Prior to Activated Sludge TreatmentEnvironmental Technology, 1997
- ZnO-catalysed photodegradation of kraft black liquorJournal of Photochemistry and Photobiology A: Chemistry, 1994
- Advanced chemical oxidation: Its present role and potential future in hazardous waste treatmentWaste Management, 1993
- Drinking-water treatment with ozoneEnvironmental Science & Technology, 1987
- Microbial degradation of chloroligninsEnvironmental Science & Technology, 1985