Design and Numerical Study of Argon Gas Diversion System Using Orthogonal Experiment to Reduce Impurities in Large-Sized Casting Silicon
Open Access
Abstract
To reduce oxygen and carbon impurities while casting silicon, an argon gas diversion system is proposed. A series of two-dimensional global transient numerical simulations are carried out using Fluent software according to the orthogonal experimental design, including heat transfer, convection of silicon melt and argon gas, and the fully coupling transport of impurities. The numerical results show that when the distance between the outer tube outlet and the cover is 10 mm, the backflow is inhibited by lateral outflow, thus the generation of CO is suppressed and the penetration of impurities into the silicon melt is decreased. The larger the flow rate, the more obvious the effect is. When the outer tube outlet is far from the cover, the effect of removing impurities is no longer significant. In addition, too large or too small an inner tube flow rate is not conducive to impurity reduction. The optimal parameter combination of outer tube flow rate, inner tube flow rate, and the distance between outer tube outlet and the cover are determined by the orthogonal experiment. Compared with the original furnace, the average concentration of oxygen and carbon in casting silicon ingots could be decreased by 7.4% and 59.9%, respectively, by using the optimized argon gas diversion system.Keywords
Funding Information
- The Project is supported by Key Research and Development Program of Jiangsu Province of China (Grant No. BE2019009-003)
- Industry-University-Research Project (Wuxi Suntech Solar Power Co., Ltd. Grant No. 8421130025)
- the National Natural Science Foundation for Young Scholars of China (Grant No. 51206069)
This publication has 34 references indexed in Scilit:
- Numerical investigation of oxygen impurity distribution during multicrystalline silicon crystal growth using a gas flow guidance deviceJournal of Crystal Growth, 2012
- Study of SiC and Si3N4 inclusions in industrial multicrystalline silicon ingots grown by directional solidification methodMaterials Science in Semiconductor Processing, 2010
- Global Simulation of Coupled Carbon and Oxygen Transport in a Unidirectional Solidification Furnace for Solar CellsJournal of the Electrochemical Society, 2010
- Influence of crucible and coating quality on the properties of multicrystalline silicon for solar cellsJournal of Crystal Growth, 2009
- On-wafer investigation of SiC and Si3N4 inclusions in multicrystalline Si grown by directional solidificationSolar Energy Materials and Solar Cells, 2008
- Investigation of oxygen distribution in electromagnetic CZ–Si melts with a transverse magnetic field using 3D global modelingJournal of Crystal Growth, 2007
- Formation and annihilation of oxygen donors in multicrystalline silicon for solar cellsMaterials Science and Engineering: B, 2000
- The Effects of Gas‐Phase Convection on Carbon Contamination of Czochralski‐Grown SiliconJournal of the Electrochemical Society, 1995
- Concentration, Solubility, and Equilibrium Distribution Coefficient of Nitrogen and Oxygen in Semiconductor SiliconJournal of the Electrochemical Society, 1973
- Concentration and Behavior of Carbon in Semiconductor SiliconJournal of the Electrochemical Society, 1970