Self-Referential Generalized-Cylinder Fitting for Mast Deformation Measurement from UAV Point Clouds
Open Access
Abstract
Dimensional control of tall-ship masts is difficult: rigging occludes deck-based surveys, and registration to a design model assumes it matches the as-built structure. We present a deterministic, self-referential method that measures mast bending from an unmanned aerial vehicle (UAV) photogrammetric point cloud without a computer-aided design model. Each mast is modeled as a tapered generalized cylinder: slices are fitted with trimmed circles, flare and rigging-band slices are rejected, and an uncertainty-weighted centerline is split into rake and bending. A five-mast shared-curvature test provides a candidate bound on photogrammetric doming but is inconclusive here. On the Golden Horizon, the method recovers aft rakes of 1.2–1.9° and bends of 36–160 mm at wavelengths above 16 m. On matched synthetic clouds, assumed spatially correlated reconstruction error sets per-mast floors of 20–27 mm (mean) and 29–40 mm (90th percentile), against 7 mm under independent noise; UAV and terrestrial laser scanning (TLS) profiles have root-mean-square differences of 14–33 mm. Tested against straight synthetic masts, two masts bend significantly at the 5% level, but only the Foremast, which TLS could not check, stays significant under all fourteen error models and, under the default model, after a multiple-testing correction; the Mainmast, significant under eleven, agrees with TLS only transversely.Keywords
This publication has 32 references indexed in Scilit:
- Method for estimating management points for dimensional quality management in shipbuilding and offshore plant construction using terrestrial laser scanning and a computer-aided design modelAdvanced Engineering Informatics, 2024
- Automatic non-destructive UAV-based structural health monitoring of steel container cranesApplied Geomatics, 2023
- SHREC 2022: Fitting and recognition of simple geometric primitives on point cloudsComputers & Graphics, 2022
- ParSeNet: A Parametric Surface Fitting Network for 3D Point Clouds2020
- Accurate derivation of stem curve and volume using backpack mobile laser scanningISPRS Journal of Photogrammetry and Remote Sensing, 2020
- An adaptive approach for the reconstruction and modeling of as-built 3D pipelines from point cloudsAutomation in Construction, 2017
- Mitigating systematic error in topographic models derived from UAV and ground‐based image networksEarth Surface Processes and Landforms, 2014
- Fitting cylinders to dataJournal of Computational and Applied Mathematics, 2013
- Direct Solutions for Computing Cylinders from Minimal Sets of 3D Points2006
- Robust Regression and Outlier Detection1987