Development of Water Retentive and Thermal Resistant Cement Concrete and Cooling Effects Evaluation
Open Access
Abstract
The high pavement temperature plays an important role in the development of urban heat island (UHI) in summer. The objective of this study was to develop water retentive and thermal resistant cement concrete (WTCC) to enhance the pavement cooling effects. The WTCC was prepared by combining a water retentive material and a high aluminum refractory aggregate (RA) with porous cement concrete (PCC). Water retention capacity test, fluidity test, and compressive strength test were used to determine the composition ratio of the water retentive material. Mechanical performance and cooling effects of WTCC were evaluated by compressive and flexural strength tests and temperature monitoring test. The mass ratios of fly ash, silica fume, cement, and water in the water retentive material were determined as 65:35:15:63.9. The compressive strength and the flexural strength of WTCC after 28 days curing were 30.4 MPa and 4.6 MPa, respectively. Compared with stone mastic asphalt (SMA) mixture, PCC, and water retentive cement concrete (WCC), surface temperature of WTCC decreased by 11.4 °C, 5.5 °C, and 4.1 °C, respectively, and the internal temperatures of WTCC decreased by 10.3 °C, 6.1 °C, and 4.6 °C, respectively. The water retentive material has benefits of strength improvements and temperature reduction for WTCC. Based on the results, WTCC proved to have superior cooling effects and the potential to efficiently mitigate the UHI effects and be used in medium traffic roads.Keywords
Funding Information
- National Natural Science Foundation of China (52008333)
- Natural Science Basic Research Program of Shaanxi (2020JQ-680)
- China Postdoctoral Science Foundation (2020M673354)
- Scientific Research Program Funded by Shaanxi Provincial Education Department (20JK0711)
This publication has 24 references indexed in Scilit:
- Effect of air voids content on thermal properties of asphalt mixturesConstruction and Building Materials, 2016
- Experimental study on materials composition design and mixture performance of water-retentive asphalt concreteConstruction and Building Materials, 2016
- Thermal properties of asphalt pavements under dry and wet conditionsMaterials & Design, 2016
- The use of lightweight aggregate saturated with PCM as a temperature stabilizing material for road surfacesApplied Thermal Engineering, 2015
- Using cool pavements as a mitigation strategy to fight urban heat island—A review of the actual developmentsRenewable and Sustainable Energy Reviews, 2013
- Using cool paving materials to improve microclimate of urban areas – Design realization and results of the flisvos projectBuilding and Environment, 2012
- Porous Asphalt Pavement Temperature Effects for Urban Heat Island AnalysisTransportation Research Record: Journal of the Transportation Research Board, 2012
- Using advanced cool materials in the urban built environment to mitigate heat islands and improve thermal comfort conditionsSolar Energy, 2011
- Cooling Principle Analyses and Performance Evaluation of Heat-Reflective Coating for Asphalt PavementJournal of Materials in Civil Engineering, 2011
- Heat island mitigation using water retentive pavement sprinkled with reclaimed wastewaterWater Science & Technology, 2008