Xiaowei Wang

Xiaowei Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Xiaowei Wang has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Temperature Distribution and Transmission in Multilayer Porous Asphalt Courses

    by Hongqing Chen, Chunfa Jiang, Yunfei Su, Xiaowei Wang

    The objective of this paper was to investigate the temperature distribution and the law of temperature transmission in multilayer porous asphalt courses. Three types of multilayer porous asphalt courses are designed as the same thickness of actual pavements. In order to achieve this objective, experiments were conducted in an oven with different temperature, and samples were enwrapped with an efficient insulation material except the surface. The final temperature in samples is lower by 5~10 °C than ambient temperature and reduced gradually from top to bottom. The ability of heat transmission is related to the mixture’s air void and ambient temperature. The temperature transmission rate in porous asphalt mixture is lower than traditional dense graded asphalt mixture. At last, temperature transmission formulas of porous asphalt mixture are given.


  • Open Access

    Experimental Investigation of Moisture Sensitivity and Damage Evolution of Porous Asphalt Mixtures

    by Xinyu Hu, Xiaowei Wang, Nanxiang Zheng, Qiang Li, Jinyue Shi

    Porous asphalt (PA) mixtures are designed with a high air void (AV) (i.e., 18~22%) content allowing rainwater to infiltrate into their internal structures. Therefore, PA mixtures are more sensitive to moisture damage than traditional densely graded asphalt mixtures. However, the moisture damage evolution of PA mixtures is still unclear. The objective of this study was to investigate the moisture damage evolution and durability damage evolution of PA mixtures. The indirect tensile test (ITT), ITT fatigue test, and Cantabro loss test were used to evaluate the moisture sensitivity and durability of PA mixtures, and a staged ITT fatigue test was developed to investigate the damage evolutions under dry and wet conditions. Indirect tensile strength (ITS), fatigue life, indirect tensile resilience modulus (E), and durability decreased with the increment of moisture damage and loading cycles. The fatigue life is more sensitive to the moisture damage. The largest decrements in ITS and E were found in the first 3000 loading cycles, and PA mixtures tended to fail when the decrement exceeded 60%. Damage factors based on the ITS and E are proposed to predict the loading history of PA mixtures. The durability damage evolution and damage factors could fit an exponential model under dry conditions. Moisture had a significant influence and an acceleration function on the moisture damage evolution and durability damage evolution of PA mixtures.


  • Microstructure and damage evolution of porous asphalt mixtures under coupled effects of high temperature and moisture

    by Xiaowei Wang, Xinyu Hu, Xingyu Gu, Qiang Li, Wangxin Li, Bo Chen

    The rutting damage evolution and changes in microstructures of porous asphalt (PA) mixture are still unclear under coupled effects of high temperature and moisture. A new approach combining a staged multiphysics repeated loading permanent deformation test and X-ray computed tomography technology was developed to investigate the damage evolution and changes in microstructure under dry and coupled conditions. Densification was found at the primary stage with a decrease in total air void content (AVtotal) and interconnected air void content (AVinterconnected). Coupled effects have a greater densification function than dry conditions in the primary stage. In the secondary stage, AVtotal, AVinterconnected, and total AV number are increased. Shear failure was found in the tertiary stage under the coupled condition with an increment of AVtotal and AVinterconnected, while densification failure was found under the dry condition with a decrement of AVtotal and AVinterconnected. Under the dry conditions, radial deformation grows faster than the vertical deformation in the primary and secondary stage, while slower in the tertiary stage. However, the radial deformation grows faster than the vertical deformation through the test under the coupled effects. The coupled effects have a remarkable influence on the rutting damage evolution and failure mechanism of the PA mixture.


  • Open Access

    Development of Water Retentive and Thermal Resistant Cement Concrete and Cooling Effects Evaluation

    by Xiaowei Wang, Xinyu Hu, Xiaoping Ji, Bo Chen, Hongqing Chen

    The high pavement temperature plays an important role in the development of urban heat island (UHI) in summer. The objective of this study was to develop water retentive and thermal resistant cement concrete (WTCC) to enhance the pavement cooling effects. The WTCC was prepared by combining a water retentive material and a high aluminum refractory aggregate (RA) with porous cement concrete (PCC). Water retention capacity test, fluidity test, and compressive strength test were used to determine the composition ratio of the water retentive material. Mechanical performance and cooling effects of WTCC were evaluated by compressive and flexural strength tests and temperature monitoring test. The mass ratios of fly ash, silica fume, cement, and water in the water retentive material were determined as 65:35:15:63.9. The compressive strength and the flexural strength of WTCC after 28 days curing were 30.4 MPa and 4.6 MPa, respectively. Compared with stone mastic asphalt (SMA) mixture, PCC, and water retentive cement concrete (WCC), surface temperature of WTCC decreased by 11.4 °C, 5.5 °C, and 4.1 °C, respectively, and the internal temperatures of WTCC decreased by 10.3 °C, 6.1 °C, and 4.6 °C, respectively. The water retentive material has benefits of strength improvements and temperature reduction for WTCC. Based on the results, WTCC proved to have superior cooling effects and the potential to efficiently mitigate the UHI effects and be used in medium traffic roads.


  • Open Access

    Effects of Oblique Incidence of SV Waves on Nonlinear Seismic Response of a Lined Arched Tunnel

    by Dunyu Lyu, Sha Ma, Chu Yu, Congcong Liu, Xiaowei Wang, Buyun Yang, Ming Xiao

    The incident direction of earthquake motion is an important factor affecting the seismic response of underground structures. In this study, a three-dimensional (3D) oblique incidence method of SV waves is proposed and the effects of incident angles of SV waves on the seismic response of a lined arched tunnel are evaluated. Based on wave field decomposition principle and equivalent node force method and together with viscous-spring artificial boundary, the oblique incidence method of SV waves is implemented by transforming seismic wave field into the equivalent nodal forces acting on the artificial boundaries. By deriving the distance of the incident waves and the reflected wave on free surface to artificial boundaries, this method can comprehensively consider the phase difference of the seismic wave propagation and the influence of the damping effect of the rock medium on the seismic wave propagation. The method is programed into a dynamic finite element program and its effectiveness is examined by a numerical example. Consequently, the oblique incidence method is applied to evaluate the seismic behaviors of the tunnel. The numerical results reveal that (1) the oblique incidence of the seismic wave results in a larger seismic response; (2) the response amplitudes of the stress and displacement increase with the increase of incident angles and reaching the maximum in the case of 30° incident angle; (3) the damage extent increases with an increase in the incident angles, and the oblique incidence of the seismic wave is believed to increase the spatial difference of damage distribution.


  • Open Access

    Nonlinear Seismic Response of a Hydraulic Tunnel Considering Fluid-Solid Coupling

    by Dunyu Lyu, Chu Yu, Sha Ma, Xiaowei Wang

    The seismic response of hydraulic tunnels is a complex nonlinear process. What makes the case even more interesting is that the large amount of water in hydraulic tunnels which is likely to induce considerable hydrodynamic pressure acted on tunnel structures during earthquakes. In this work, a full three-dimensional (3D) dynamic finite element model is adopted to conduct a comprehensive assessment of the seismic behaviors of a hydraulic tunnel system. In this analysis, the plastic-damage model is employed to reflect the nonlinear mechanical behaviors of the concrete lining, and a fluid-solid coupling method based on an explicit weighted residual approach is proposed to consider the effects of the hydrodynamic pressures on the seismic response of the hydraulic tunnel. The numerical results indicate that the hydrodynamic pressure contributes to a greater seismic response of the tunnel structure. When the hydrodynamic pressure is considered, the magnitudes of the maximum principal stresses are likely to increase by 50% and the displacement amplitudes are approximately 2 cm more than that of without hydrodynamic pressure. The hydrodynamic pressure exacerbates the damage degree of the tunnel structure, and the waist suffers the most severe damage.


  • Open Access

    Mechanical properties of gutta-percha sulfide modified asphalt

    by X Y Zou, X Y Gu, X W Wang

    Gutta-percha is the isomer of caoutchouc and can be used to enhance the performance of asphalt. In this paper, the produce proceedings of gutta-percha sulfide and gutta-percha sulfide modified asphalt are introduced. The performance indices of gutta-percha sulfide modified asphalt samples with different proportions are examined based on laboratory tests and the optimum ratio of gutta-percha and sulfur is decided.The micromechanism, temperature sensitivity, high and low temperature properties and viscoelasticity of the polymer modified asphalt are analyzed to discuss the modified mechanism and to decide the optimal polymer content. Low temperature bending tests are carried out to verify the low temperature performance of gutta-percha sulfide modified asphalt mixture. Research results showed that gutta-percha sulfide modified asphalt has good low temperature performance and a promising application prospect in the cold regions.


  • Open Access

    Seismic Response Analysis of Concrete Lining Structure in Large Underground Powerhouse

    by Xiaowei Wang, Juntao Chen, Ming Xiao, Danqi Wu

    Based on the dynamic damage constitutive model of concrete material and seismic rock‐lining structure interaction analysis method, the seismic response of lining structure in large underground powerhouse is studied in this paper. In order to describe strain rate dependence and fatigue damage of concrete material under cyclic loading, a dynamic constitutive model for concrete lining considering tension and shear anisotropic damage is presented, and the evolution equations of damage variables are derived. The proposed model is of simple form and can be programmed into finite element procedure easily. In order to describe seismic interaction characteristics of the surrounding rock and lining, an explicit dynamic contact analysis method considering bond and damage characteristics of contact face between the surrounding rock and lining is proposed, and this method can integrate directly without iteration. The proposed method is applied to seismic stability calculation of Yingxiuwan Underground Powerhouse, results reveal that the amplitude and duration of input seismic wave determine the damage degree of lining structure, the damage zone of lining structure is mainly distributed in its arch, and the contact face damage has great influence on the stability of the lining structure.