Modeling of adsorption flux in nickel-contaminated synthetic simulated wastewater in the batch reactor
- 12 June 2020
- journal article
- research article
- Published by Taylor & Francis in Journal of Environmental Science and Health, Part A
- Vol. 55 (9) , 1059-1069
Abstract
In the present investigation, physico-chemical characterization of composite material revealed the presence of fluffy surface structure with crystalline look and negatively charged surface functional groups. The study of adsorption flux by using dimensionless numbers (2.62), Nk (62.68) and (1.17 × 10−5) proved that adsorption of nickel ions on the surface of composite material was mostly film diffusion-limited with maximum surface area coverage coupled with weakened surface tension. The results of intraparticle diffusivity and Boyd plot model showed that at the onset of process, film diffusion was the primary mechanism involved and at the later stage intraparticle diffusion played a critical role as rate governing step. The values of film (0.65 × 10−8 cm2 sec−1) and pore diffusivity (1.8 × 10−12 cm2 sec−1) coefficients showed that the adsorption process is dependent upon two different types of diffusion namely film and pore diffusion. Overall, transport and reshuffling mechanism had no substantial role in adsorption dynamics of nickel ions on the surface of composite material. Sorption isotherm and kinetics modeling showed higher values of regression coefficients for Langmuir isotherm (R2 = 0.99) and pseudo-second-order kinetic model (R2 = 0.99) compared to other models. This showed that sorption of nickel followed monolayer coverage with chemisorption at optimized process parameters like pH 6, biosorbent dose 0.1 g/L, temperature 50 °C, agitation rate180 rpm, adsorbate concentration100 mg/L and contact time 60 minutes. The positive value of enthalpy of adsorption (ΔH = + 10.41 kJ/mole) and entropy (ΔS = +58.19 J/mol K) showed that binding of nickel ions on the surface of the composite material was endothermic with improved randomness at solid-liquid interface. The negative value of (ΔG = −6.4 to -8.67 kJ/mol) showed spontaneous nature of nickel adsorption on composite material in the liquid phase.
Keywords
This publication has 53 references indexed in Scilit:
- Non-destructive characterization of fifty various species of pigments of archaeological and artistic interest by using the portable X-ray diffraction system of the LANDIS laboratory of Catania (Italy)Microchemical Journal, 2010
- Arsenic adsorption on Ti‐pillared montmorilloniteJournal of Chemical Technology & Biotechnology, 2010
- Investigation of Neolithic ceramic pigments using synchrotron radiation X-ray diffractionPowder Diffraction, 2008
- Adsorption Dynamics and Electrochemical and Photophysical Properties of Thiolated Ruthenium 2,2‘-Bipyridine MonolayersThe Journal of Physical Chemistry B, 2006
- Curvature Effects in the Analysis of Pendant Bubble Data: Comparison of Numerical Solutions, Asymptotic Arguments, and DataJournal of Colloid and Interface Science, 2001
- The release of nickel and other trace elements from electric kettles and coffee machinesFood Additives & Contaminants, 2000
- Absorption and Retention of Nickel from Drinking Water in Relation to Food Intake and Nickel SensitivityToxicology and Applied Pharmacology, 1999
- Adsorption dynamics of surfactants at the air/water interface: a critical review of mathematical models, data, and mechanismsColloids and Surfaces A: Physicochemical and Engineering Aspects, 1995
- Equilibrium and dynamics of adsorption of surfactants at fluid-fluid interfacesChemical Engineering Science, 1988
- Red Ochre and Human Evolution: A Case for Discussion [and Comments and Reply]Current Anthropology, 1980