Jyoti Singh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Jyoti Singh has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Vishal Mishra
School of Biochemical Engineering, IIT (BHU) Varanasi, Varanasi, India
7 shared publications Priyanka Yadav
3 shared publicationsVishal Mishra
3 shared publicationsGyanendra Tripathi
2 shared publications- Anuja Mishra
Department of Biotechnology, Institute of Applied Science & Humanities, GLA University, Mathura- 281406, U.P., India
1 shared publication Ashok Kumar Pal
IIT (BHU) Varanasi
1 shared publication
Latest Publications
- 15 May 2026
- Published by IWA Publishing in Water Quality Research Journal
- Vol. 61 (3) , 381-395
Micro- and nano-plastics: detection and remediation strategies with insights into occurrence and health impacts
Graphical abstract showing rising global plastic production, environmental fate of MNPs, impacts on human health, and remediation methods. Micro- and nanoplastics (MNPs) are emerging contaminants whose physico-chemical characteristics govern their environmental fate, bioavailability, degradation, and transport into biota, positioning them as potential vectors for other environmental pollutants. Advanced analytical techniques, including matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, Raman spectroscopy, and micro-Fourier transform infrared spectroscopy, have significantly improved MNP identification and quantification. Increasing evidence links MNP exposure to oxidative stress, inflammation, and immune dysregulation in critical organs, including the liver, kidney, brain, and gastrointestinal tract. However, most ecotoxicological studies remain laboratory-based, limiting their environmental relevance. Critical gaps persist regarding co-contaminant interactions, bioaccumulation, trophic transfer, and long-term field-scale impacts. Conventional wastewater treatment systems can remove a substantial fraction of microplastics, although smaller particles, particularly nanoplastics, often evade treatment. Advanced remediation approaches, including membrane filtration, adsorption, and oxidation processes, provide enhanced removal efficiency but are constrained by fouling, energy demand, and operational costs. Consequently, integrated and hybrid treatment systems combining physical, chemical, and biological mechanisms are increasingly recognized as promising strategies for effective MNP management. Continued interdisciplinary research and coordinated policy interventions are essential to mitigate the ecological and human health risks associated with MNPs contamination.
- 15 May 2026
- Published by IWA Publishing in Water Quality Research Journal
- Vol. 61 (3) , 381-395
Micro- and nano-plastics: detection and remediation strategies with insights into occurrence and health impacts
Graphical abstract showing rising global plastic production, environmental fate of MNPs, impacts on human health, and remediation methods. Micro- and nanoplastics (MNPs) are emerging contaminants whose physico-chemical characteristics govern their environmental fate, bioavailability, degradation, and transport into biota, positioning them as potential vectors for other environmental pollutants. Advanced analytical techniques, including matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, Raman spectroscopy, and micro-Fourier transform infrared spectroscopy, have significantly improved MNP identification and quantification. Increasing evidence links MNP exposure to oxidative stress, inflammation, and immune dysregulation in critical organs, including the liver, kidney, brain, and gastrointestinal tract. However, most ecotoxicological studies remain laboratory-based, limiting their environmental relevance. Critical gaps persist regarding co-contaminant interactions, bioaccumulation, trophic transfer, and long-term field-scale impacts. Conventional wastewater treatment systems can remove a substantial fraction of microplastics, although smaller particles, particularly nanoplastics, often evade treatment. Advanced remediation approaches, including membrane filtration, adsorption, and oxidation processes, provide enhanced removal efficiency but are constrained by fouling, energy demand, and operational costs. Consequently, integrated and hybrid treatment systems combining physical, chemical, and biological mechanisms are increasingly recognized as promising strategies for effective MNP management. Continued interdisciplinary research and coordinated policy interventions are essential to mitigate the ecological and human health risks associated with MNPs contamination.
- Open Access
- 4 October 2023
- Published by Sciencedomain International in International Journal of Environment and Climate Change
- Vol. 13 (11) , 2292-2299
Study on G x E Interaction of Sorghum Lines (Sorghum bicolor L. Moench) for Grain Yield and Its Contributing Traits in Germplasm of Indore, India
- 4 October 2023
- Published by Sciencedomain International in International Journal of Environment and Climate Change
- Vol. 13 (11) , 2292-2299
Open AccessStudy on G x E Interaction of Sorghum Lines (Sorghum bicolor L. Moench) for Grain Yield and Its Contributing Traits in Germplasm of Indore, India
- 17 March 2023
- Published by Elsevier
- p. 159-176
Microbial enhanced oil recovery: application of biosurfactants in oil and gas industry
- 17 March 2023
- Published by Elsevier
- p. 159-176
Microbial enhanced oil recovery: application of biosurfactants in oil and gas industry
- 15 April 2021
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 57 (3) , 354-371
Development of sustainable and ecofriendly metal ion scavenger for adsorbing Cu2+, Ni2+ and Zn2+ ions from the aqueous phase
In the present investigation, adsorption of Cu2+, Ni2+ and Zn2+ ions is carried out on the surface of novel composite made up of bentonite clay and red-ocher. The study of molecular dynamics through dimensionless numbers , Nk and proved that adsorption of Cu2+, Ni2+ and Zn2+ ions on the surface of composite was diffusion controlled. A deviation of 0.08% for Cu2+, 1.26% for Ni2+ and 0.53% for Zn2+ ions between experimental and artificial neural network model predicted values reflected that the back-propagation technique involving Levenberg-Marquardt algorithm was appropriate for the prediction of the output function. The physico-chemical characterization of composite indicated fluffy composite surface housing hydroxyl group, Si-O stretching and Si-O-Al vibration. These groups were due to aluminum-rich octahedral centers and Si-O bond stretching of silica and quartz. The X-ray diffractogram of composite depicted the presence of quartz, alumina, montmorillonite and hematite in the composite that played a significant role in adsorbing heavy metal ions. The Langmuir isotherm and pseudo-second-order kinetic model showed lower values of sum of square of residuals compared to other models. This showed that sorption of Cu2+, Ni2+ and Zn2+ ions followed monolayer coverage coupled with chemisorption mode. The composite possesses high adsorption capacity such as 61.86 mg/g for Cu2+ ions, 37.89 mg/g for Ni2+ ions and 10.48 mg/g for Zn2+ ions. The adsorption of metal ions onto composite surface was endothermic with increased randomness at the solid–liquid interface.- 15 April 2021
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 57 (3) , 354-371
Development of sustainable and ecofriendly metal ion scavenger for adsorbing Cu2+, Ni2+ and Zn2+ ions from the aqueous phase
In the present investigation, adsorption of Cu2+, Ni2+ and Zn2+ ions is carried out on the surface of novel composite made up of bentonite clay and red-ocher. The study of molecular dynamics through dimensionless numbers , Nk and proved that adsorption of Cu2+, Ni2+ and Zn2+ ions on the surface of composite was diffusion controlled. A deviation of 0.08% for Cu2+, 1.26% for Ni2+ and 0.53% for Zn2+ ions between experimental and artificial neural network model predicted values reflected that the back-propagation technique involving Levenberg-Marquardt algorithm was appropriate for the prediction of the output function. The physico-chemical characterization of composite indicated fluffy composite surface housing hydroxyl group, Si-O stretching and Si-O-Al vibration. These groups were due to aluminum-rich octahedral centers and Si-O bond stretching of silica and quartz. The X-ray diffractogram of composite depicted the presence of quartz, alumina, montmorillonite and hematite in the composite that played a significant role in adsorbing heavy metal ions. The Langmuir isotherm and pseudo-second-order kinetic model showed lower values of sum of square of residuals compared to other models. This showed that sorption of Cu2+, Ni2+ and Zn2+ ions followed monolayer coverage coupled with chemisorption mode. The composite possesses high adsorption capacity such as 61.86 mg/g for Cu2+ ions, 37.89 mg/g for Ni2+ ions and 10.48 mg/g for Zn2+ ions. The adsorption of metal ions onto composite surface was endothermic with increased randomness at the solid–liquid interface.- 1 April 2021
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 9 (2)
Sorption kinetics of an eco-friendly and sustainable Cr (VI) ion scavenger in a batch reactor
- 1 April 2021
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 9 (2)
Sorption kinetics of an eco-friendly and sustainable Cr (VI) ion scavenger in a batch reactor
- 9 November 2020
- Published by Taylor & Francis in Bioremediation Journal
- Vol. 25 (1) , 48-71
Simultaneous removal of Cu2+, Ni2+and Zn2+ions using leftoverAzadirachta indicatwig ash
A novel adsorbent namely, Azadirachta indica twig ash, was identified and evaluated for adsorption of Cu2+, Ni2+ and Zn2+ ions. The properties of novel adsorbent were studied by various characterization techniques such as Scanning Electron Microscopy, Fourier Transformation Infrared analysis, X-ray diffraction, proximate and ultimate analysis. Furthermore, an optimization study was conducted to determine the optimal value of process parameters. Various dimensionless numbers have been derived and used to elucidate the adsorption dynamics in the present study. Application of Artificial Neural Network in data modeling together with comparative analysis of novel adsorbents with other adsorbents has been done. Elemental analysis revealed 38.47% Carbon, 1.89% Hydrogen, 49.21% Oxygen and 10.43% Nitrogen in the A. indica twig ash. Outcome of X-ray diffraction showed amorphous characteristic (58.4%) of an adsorbent. BET surface area and bulk density was found to be 71.35 m2/g and 0.47 g/cm3 for A. indica twig ash. Furthermore, the correlation plot showed a deviation of 0.16% for Cu2+, 0.09% for Ni2+ and 0.08% for Zn2+ between experimental and Artificial Neural Network predicted values which implied that the chosen algorithm and methodology were appropriate for prediction. The obtained values of film and pore diffusivity were 2.13 × 10−12, 5.17 × 10−12, 3.43 × 10−11 cm2 sec−1 and 3.70 × 10−13, 4.44 × 10−13, 5.55 × 10−13 cm2 sec−1 for Cu2+, Ni2+ and Zn2+ ions, respectively. These values revealed that the adsorption mechanism depends on the pore diffusion. The values of dimensionless numbers Nk and indicated that the adsorption of Cu2+, Ni2+ and Zn2+ ions on A. indica twig ash surface was predominantly controlled by diffusion. Moreover, isotherm and kinetic modeling demonstrated superior values of the regression coefficient for the Langmuir isotherm and pseudo-second order kinetic model. This reflected that the adsorption occurred in monolayer fashion. Simultaneous removal of metal ions followed an order based on electronegativity: Cu2+ > Ni2+ > Zn2+. Positive ΔH (126,579.20 kJ/mole, 96,527.95 kJ/mole and 73,076.65 kJ/mole) and ΔS (437.65 J/mol K, 331.15, J/mol K and 248.71 J/mol K) for Cu2+, Ni2+ and Zn2+ ions, respectively showed that binding of metal ions on the surface of A. indica twig ash was endothermic with increased turbulence at the solid-aqueous interface.- 9 November 2020
- Published by Taylor & Francis in Bioremediation Journal
- Vol. 25 (1) , 48-71
Simultaneous removal of Cu2+, Ni2+and Zn2+ions using leftoverAzadirachta indicatwig ash
A novel adsorbent namely, Azadirachta indica twig ash, was identified and evaluated for adsorption of Cu2+, Ni2+ and Zn2+ ions. The properties of novel adsorbent were studied by various characterization techniques such as Scanning Electron Microscopy, Fourier Transformation Infrared analysis, X-ray diffraction, proximate and ultimate analysis. Furthermore, an optimization study was conducted to determine the optimal value of process parameters. Various dimensionless numbers have been derived and used to elucidate the adsorption dynamics in the present study. Application of Artificial Neural Network in data modeling together with comparative analysis of novel adsorbents with other adsorbents has been done. Elemental analysis revealed 38.47% Carbon, 1.89% Hydrogen, 49.21% Oxygen and 10.43% Nitrogen in the A. indica twig ash. Outcome of X-ray diffraction showed amorphous characteristic (58.4%) of an adsorbent. BET surface area and bulk density was found to be 71.35 m2/g and 0.47 g/cm3 for A. indica twig ash. Furthermore, the correlation plot showed a deviation of 0.16% for Cu2+, 0.09% for Ni2+ and 0.08% for Zn2+ between experimental and Artificial Neural Network predicted values which implied that the chosen algorithm and methodology were appropriate for prediction. The obtained values of film and pore diffusivity were 2.13 × 10−12, 5.17 × 10−12, 3.43 × 10−11 cm2 sec−1 and 3.70 × 10−13, 4.44 × 10−13, 5.55 × 10−13 cm2 sec−1 for Cu2+, Ni2+ and Zn2+ ions, respectively. These values revealed that the adsorption mechanism depends on the pore diffusion. The values of dimensionless numbers Nk and indicated that the adsorption of Cu2+, Ni2+ and Zn2+ ions on A. indica twig ash surface was predominantly controlled by diffusion. Moreover, isotherm and kinetic modeling demonstrated superior values of the regression coefficient for the Langmuir isotherm and pseudo-second order kinetic model. This reflected that the adsorption occurred in monolayer fashion. Simultaneous removal of metal ions followed an order based on electronegativity: Cu2+ > Ni2+ > Zn2+. Positive ΔH (126,579.20 kJ/mole, 96,527.95 kJ/mole and 73,076.65 kJ/mole) and ΔS (437.65 J/mol K, 331.15, J/mol K and 248.71 J/mol K) for Cu2+, Ni2+ and Zn2+ ions, respectively showed that binding of metal ions on the surface of A. indica twig ash was endothermic with increased turbulence at the solid-aqueous interface.- 12 June 2020
- Published by Taylor & Francis in Journal of Environmental Science and Health, Part A
- Vol. 55 (9) , 1059-1069
Modeling of adsorption flux in nickel-contaminated synthetic simulated wastewater in the batch reactor
In the present investigation, physico-chemical characterization of composite material revealed the presence of fluffy surface structure with crystalline look and negatively charged surface functional groups. The study of adsorption flux by using dimensionless numbers (2.62), Nk (62.68) and (1.17 × 10−5) proved that adsorption of nickel ions on the surface of composite material was mostly film diffusion-limited with maximum surface area coverage coupled with weakened surface tension. The results of intraparticle diffusivity and Boyd plot model showed that at the onset of process, film diffusion was the primary mechanism involved and at the later stage intraparticle diffusion played a critical role as rate governing step. The values of film (0.65 × 10−8 cm2 sec−1) and pore diffusivity (1.8 × 10−12 cm2 sec−1) coefficients showed that the adsorption process is dependent upon two different types of diffusion namely film and pore diffusion. Overall, transport and reshuffling mechanism had no substantial role in adsorption dynamics of nickel ions on the surface of composite material. Sorption isotherm and kinetics modeling showed higher values of regression coefficients for Langmuir isotherm (R2 = 0.99) and pseudo-second-order kinetic model (R2 = 0.99) compared to other models. This showed that sorption of nickel followed monolayer coverage with chemisorption at optimized process parameters like pH 6, biosorbent dose 0.1 g/L, temperature 50 °C, agitation rate180 rpm, adsorbate concentration100 mg/L and contact time 60 minutes. The positive value of enthalpy of adsorption (ΔH = + 10.41 kJ/mole) and entropy (ΔS = +58.19 J/mol K) showed that binding of nickel ions on the surface of the composite material was endothermic with improved randomness at solid-liquid interface. The negative value of (ΔG = −6.4 to -8.67 kJ/mol) showed spontaneous nature of nickel adsorption on composite material in the liquid phase.- 12 June 2020
- Published by Taylor & Francis in Journal of Environmental Science and Health, Part A
- Vol. 55 (9) , 1059-1069
Modeling of adsorption flux in nickel-contaminated synthetic simulated wastewater in the batch reactor
In the present investigation, physico-chemical characterization of composite material revealed the presence of fluffy surface structure with crystalline look and negatively charged surface functional groups. The study of adsorption flux by using dimensionless numbers (2.62), Nk (62.68) and (1.17 × 10−5) proved that adsorption of nickel ions on the surface of composite material was mostly film diffusion-limited with maximum surface area coverage coupled with weakened surface tension. The results of intraparticle diffusivity and Boyd plot model showed that at the onset of process, film diffusion was the primary mechanism involved and at the later stage intraparticle diffusion played a critical role as rate governing step. The values of film (0.65 × 10−8 cm2 sec−1) and pore diffusivity (1.8 × 10−12 cm2 sec−1) coefficients showed that the adsorption process is dependent upon two different types of diffusion namely film and pore diffusion. Overall, transport and reshuffling mechanism had no substantial role in adsorption dynamics of nickel ions on the surface of composite material. Sorption isotherm and kinetics modeling showed higher values of regression coefficients for Langmuir isotherm (R2 = 0.99) and pseudo-second-order kinetic model (R2 = 0.99) compared to other models. This showed that sorption of nickel followed monolayer coverage with chemisorption at optimized process parameters like pH 6, biosorbent dose 0.1 g/L, temperature 50 °C, agitation rate180 rpm, adsorbate concentration100 mg/L and contact time 60 minutes. The positive value of enthalpy of adsorption (ΔH = + 10.41 kJ/mole) and entropy (ΔS = +58.19 J/mol K) showed that binding of nickel ions on the surface of the composite material was endothermic with improved randomness at solid-liquid interface. The negative value of (ΔG = −6.4 to -8.67 kJ/mol) showed spontaneous nature of nickel adsorption on composite material in the liquid phase.- 30 January 2020
- Published by Taylor & Francis
- p. 224-242
Mathematical Models for Analyzing the Microbial Growth in Food
One of the basic precepts is that bacterial growth is a function of food available in the environment. The microbial species that will deal better in the environment will thrive. The specific information about growth characteristics of microorganism can be given by a number of factors affecting microbial growth. However, it is virtually impossible to attain this goal as there are a number of different foods eaten globally and many biological variations are present within only a single food. Luckily, a number of primary growth factors are limited for bacterial growth. Thus, the behavior of microbes could be estimated by analyzing the response to those factors. This is the fundamental purpose of predictive microbiology, a branch of food microbiology. The prime objective is to determine the relationship between primary factors and microbial growth in order to overcome the requirement for a vast amount of data. The general method comprises of procurement of data that will help to build mathematical relationships. These mathematical models are then used for the prediction of microbial behaviour in a variety of foods, based on physical measurement of the main factors (Buchanan, 1992).
- 30 January 2020
- Published by Taylor & Francis
- p. 224-242
Mathematical Models for Analyzing the Microbial Growth in Food
One of the basic precepts is that bacterial growth is a function of food available in the environment. The microbial species that will deal better in the environment will thrive. The specific information about growth characteristics of microorganism can be given by a number of factors affecting microbial growth. However, it is virtually impossible to attain this goal as there are a number of different foods eaten globally and many biological variations are present within only a single food. Luckily, a number of primary growth factors are limited for bacterial growth. Thus, the behavior of microbes could be estimated by analyzing the response to those factors. This is the fundamental purpose of predictive microbiology, a branch of food microbiology. The prime objective is to determine the relationship between primary factors and microbial growth in order to overcome the requirement for a vast amount of data. The general method comprises of procurement of data that will help to build mathematical relationships. These mathematical models are then used for the prediction of microbial behaviour in a variety of foods, based on physical measurement of the main factors (Buchanan, 1992).
- 1 January 2020
- Published by Elsevier
- p. 205-220
Low-cost bio-adsorbent for emerging inorganic pollutants
- 1 January 2020
- Published by Elsevier
- p. 205-220
Low-cost bio-adsorbent for emerging inorganic pollutants
- 1 January 2020
- Published by Elsevier
- p. 305-321
Advancement and modification in photoreactor used for degradation processes
- 1 January 2020
- Published by Elsevier
- p. 305-321
Advancement and modification in photoreactor used for degradation processes