Bending strength of delaminated aerospace composites
Authors:
- 28 April 2012
- journal article
- Published by The Royal Society in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 370 (1965) , 1780-1797
Abstract
Buckling-driven delamination is considered among the most critical failure modes in composite laminates. This paper examines the propagation of delaminations in a beam under pure bending. A pre-developed analytical model to predict the critical buckling moment of a thin sub-laminate is extended to account for propagation prediction, using mixed-mode fracture analysis. Fractography analysis is performed to distinguish between mode I and mode II contributions to the final failure of specimens. Comparison between experimental results and analysis shows agreement to within 5 per cent in static propagation moment for two different materials. It is concluded that static fracture is almost entirely driven by mode II effects. This result was unexpected because it arises from a buckling mode that opens the delamination. For this reason, and because of the excellent repeatability of the experiments, the method of testing may be a promising means of establishing the critical value of mode II fracture toughness, GIIC, of the material. Fatigue testing on similar samples showed that buckled delamination resulted in a fatigue threshold that was over 80 per cent lower than the static propagation moment. Such an outcome highlights the significance of predicting snap-buckling moment and subsequent propagation for design purposes.Keywords
This publication has 15 references indexed in Scilit:
- Compressive strength of delaminated aerospace compositesPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2012
- Buckling and Postbuckling of a Delaminated Composite Beam in BendingAIAA Journal, 2011
- Post-buckled propagation model for compressive fatigue of impact damaged laminatesInternational Journal of Solids and Structures, 2008
- Local buckling and debonding problem of a bonded two-layer plateArchive of Applied Mechanics, 2005
- Assessment of the Fracture Behavior of an Asymmetrically Loaded Cantilever Composite StructureJournal of Engineering Materials and Technology, 2003
- Delamination modelling of a curved composite beam subjected to an opening bending momentThe Journal of Strain Analysis for Engineering Design, 2003
- Approximate Analysis of the Buckling Behavior of Composites with DelaminationJournal of Composite Materials, 2003
- Snap buckling of delaminated composites under pure bendingComposites Science and Technology, 1990
- Two-Dimensional Modelling of Compressive Failure in Delaminated LaminatesJournal of Composite Materials, 1985
- One dimensional modelling of failure in laminated plates by delamination bucklingInternational Journal of Solids and Structures, 1981