Temperature‐controlled two‐wavelength laser soldering of tissues
Authors:
- Ilan GabayIGIlan Gabay
- Tamar VasilyevTVTamar Vasilyev
- Yaron RabiYRYaron Rabi
- 17 October 2011
- journal article
- research article
- Published by Wiley in Lasers in Surgery and Medicine
- Vol. 43 (9) , 907-913
Abstract
Background and Objective: Laser tissue soldering is a method for bonding of incisions in tissues. A biological solder is spread over the cut, laser radiation heats the solder and the underlying cut edges and the incision is bonded. This method offers many advantages over conventional techniques (e.g., sutures). Past researches have shown that laser soldering, using a single laser, does not provide sufficient strength for bonding of cuts in thick (>1 mm) tissues. This study introduces a novel method for laser soldering of thick tissues, under temperature control, using two lasers, emitting two different wavelengths.Study Design/Materials and Methods: An experimental system was built, using two lasers: (i) a CO2 laser, whose radiation heated the upper surface of the tissue and (ii) a GaAs laser that heated an albumin layer under the tissue. An infrared fiber‐optic radiometer monitored the temperature of the tissue. All three devices were connected to a computer that controlled the process. A computer simulation was written to optimize the system parameters. The system was tested on tissue phantoms, to validate the simulation and ensure that both the upper and lower sides of the cut were heated, and that the temperature could be controlled on both sides. The system was then used ex vivo to bond longitudinal cuts of lengths ∼12 mm in the esophagi of large farm pigs.Results: The theoretical simulations showed a good stabilization of the temperatures at the upper and lower tissue surfaces at the target values. Experiments on tissue phantom showed a good agreement with these simulations. Incisions in esophagi, removed from large farm pigs, were then successfully bonded. The mean burst pressure was ∼3.6 m of water.Conclusions: This study demonstrated the capability of soldering cuts in thick tissues, paving the way for new types of surgical applications. Lasers Surg. Med. 43:907‐913, 2011.Keywords
Funding Information
- The Elizabeth and Nicholas Slezak Super Center for Cardiac Research and Medical Engineering
This publication has 18 references indexed in Scilit:
- In vitro large diameter bowel anastomosis using a temperature controlled laser tissue soldering system and albumin stentLasers in Surgery and Medicine, 2009
- In vitro and in vivo tissue repair with laser‐activated chitosan adhesiveLasers in Surgery and Medicine, 2006
- Optical Absorption Coefficient, Time of Thermal Relaxation, Time of Surface Threshold, and Time of Heat Incubation for PMMA Samples at the CO 2 Laser-Beam Wavelength of 10.6 µmPhotomedicine and Laser Surgery, 2006
- Evaluation of photochemical tissue bonding for closure of skin incisions and excisionsLasers in Surgery and Medicine, 2005
- Repair of pig dura in vivo using temperature controlled CO2 laser solderingLasers in Surgery and Medicine, 2005
- Esophageal Perforation in AdultsAnnals of Surgery, 2005
- Improved vascular tissue fusion using new light-activated surgical adhesive on a canine modelJournal of Biomedical Optics, 2001
- BLADDER WELDING IN RATS USING CONTROLLED TEMPERATURE CO 2 LASER SYSTEMJournal of Urology, 1999
- Laser tissue welding: laser spot size and beam profile studiesIEEE Journal of Selected Topics in Quantum Electronics, 1999
- Intrathoracic esophageal perforation: The merit of primary repairThe Journal of Thoracic and Cardiovascular Surgery, 1995