Structure Property Investigation of Glass-Carbon Prepreg Waste-Polymer Hybrid Composites Degradation in Water Condition
Open Access
Abstract
The limited shelf life of carbon prepreg waste (CPW) from component manufacturing restricts its use as a composite reinforcement fibre on its own. However, CPW can be recycled with glass fibre (GF) reinforcement to develop a unique remediate material. Therefore, this study fabricated (1) a glass fibre-carbon prepreg waste reinforced polymer hybrid composite (GF-CPW-PP), (2) a polypropylene composite (PP), (3) a carbon prepreg waste reinforced composite (CPW-PP), and (4) a glass fibre reinforced composite (GF-PP) and reported their degradation and residual tension properties after immersion in water. The polymer hybrid composites were fabricated via extrusion technique with minimum reinforce glass-carbon prepreg waste content of 10 wt%. The immersion test was conducted at room temperature using distilled water. Moisture content and diffusion coefficient (DC) were determined based on water adsorption values recorded at 24-h intervals over a one-week period. The results indicated that GF-PP reinforced composites retained the most moisture post-168 h of immersion. However, hardness and tensile strength were found to decrease with increased water adsorption. Tensile strength was found to be compromised since pores produced during hydrolysis reduced interfacial bonding between glass fibre and prepreg carbon reinforcements and the PP matrix.Keywords
Funding Information
- Ministry of Higher Education, Malaysia (FRGS/1/2019/TK05/UTP/03/2)
This publication has 31 references indexed in Scilit:
- Carbon fibre reinforced composite waste: An environmental assessment of recycling, energy recovery and landfillingComposites Part A: Applied Science and Manufacturing, 2013
- Recycling of glass fibre reinforced composites using subcritical hydrolysis: Reaction mechanisms and kinetics, influence of the chemical structure of the resinPolymer Degradation and Stability, 2013
- Effect of moisture absorption on the mechanical behavior of carbon fiber/epoxy matrix compositesJournal of Materials Science, 2012
- Polypropylene/(waste tire dust)/(short glass fiber composites): Effects of silane coupling agent and dynamic vulcanizationJournal of Vinyl and Additive Technology, 2011
- Effect of moisture absorption on the micromechanical behavior of carbon fiber/epoxy matrix compositesJournal of Materials Science, 2011
- Fabrication and Properties of Carbon FibersMaterials, 2009
- Influence of hygrothermal environment on thermal and mechanical properties of carbon fiber/fiberglass hybrid compositesComposites Science and Technology, 2009
- Water and Moisture Absorption and Thickness Swelling Behavior in Polypropylene/Wood Flour/Glass Fiber Hybrid CompositesJournal of Reinforced Plastics and Composites, 2009
- Comparison of water absorption in natural cellulosic fibres from wood and one-year crops in polypropylene composites and its influence on their mechanical propertiesComposites Part A: Applied Science and Manufacturing, 2004
- Size effect on tensile strength of unidirectional CFRP composites— experiment and simulationComposites Science and Technology, 2002