Abstract
Soft switching technique is the main method to increase the inverter switching frequency and thus improve the power density, which is one of the current research hotspots. Inverter soft switching needs to operate in four quadrants, wide range, time-varying load current conditions, the realization of the more complex. At this stage, soft-switching inverters are mainly based on bridge circuits, and the intertwined soft-switching and shoot-through deadtime problems in bridge circuits are one of the difficulties in limiting the improvement of inverter switching frequency and power density. To solve this problem, a passive lossless and nonshoot-through soft-switching inverter is designed in this article, which fundamentally eliminates the constraints of shoot-through to soft-switching of the inverter. The four-quadrant operating mode is given, in which the high-frequency chopper bridge operates at unidirectional voltage and current conditions, thus achieving full-load range soft switching using passive coupled inductors. Increased switching frequency and the size of the filtering components is significantly reduced. This article analyses the specific operating modes, soft switching conditions, losses, parameters, and control methods. A 1-kW prototype is established, and the results of the experiment verify the correctness of the theoretical analysis. The prototype achieves the power density of 5.8 kW/L and the peak efficiency of 97.1% at 400 kHz.
Funding Information
  • National Defense Basic Scientific Research Program of China (JCKY2021606B014)

This publication has 28 references indexed in Scilit: