Microdroplet impact at very high velocity
- 17 August 2012
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 8 (41) , 10732-10737
Abstract
Water microdroplet impact at velocities up to 100 m s−1 for droplet diameters ranging from 12 to 100 μm is studied. This parameter range covers the transition from capillary-limited to viscosity-limited spreading of the impacting droplet. Splashing is absent for all measurements; the droplets always gently spread over the surface. The maximum spreading radius is compared to several existing models. The model by Pasandideh-Fard et al. agrees well with the measured data, indicating the importance of a thin boundary layer just above the surface, in which most of the viscous dissipation in the spreading droplet takes place. As explained by the initial air layer under the impacting droplet, a contact angle of 180 degrees is used as the model input.Keywords
All Related Versions
This publication has 28 references indexed in Scilit:
- Drop dynamics after impact on a solid wall: Theory and simulationsPhysics of Fluids, 2010
- Events before droplet splashing on a solid surfaceJournal of Fluid Mechanics, 2010
- DROP IMPACT DYNAMICS: Splashing, Spreading, Receding, Bouncing…Annual Review of Fluid Mechanics, 2006
- The air bubble entrapped under a drop impacting on a solid surfaceJournal of Fluid Mechanics, 2005
- Maximal deformation of an impacting dropJournal of Fluid Mechanics, 2004
- Experimental study of the impact of an ink-jet printed droplet on a solid substratePhysics of Fluids, 2004
- Normal impact of a liquid drop on a dry surface: model for spreading and recedingProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2002
- Phenomena of liquid drop impact on solid and liquid surfacesFluid Dynamics Research, 1993
- Dynamic Spreading of Drops Impacting onto a Solid SurfaceIndustrial & Engineering Chemistry Process Design and Development, 1977
- Solidification of droplets on a cold surfaceInternational Journal of Heat and Mass Transfer, 1976