Active Deformation Control for a Magnetically Levitated Planar Motor Mover
- 11 October 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (1) , 242-249
Abstract
This article describes a method for the active control of the deformations on a magnetically levitated moving-magnet planar motor. The planar motor under consideration is comprised of a stator on a double coil array configuration and a mover with permanent magnets, and it is designed to perform positioning tasks with nanometer level of accuracy. Due to the spatially asymmetric, nonuniform force distribution on the magnet plate, mechanical deformations are induced to the mover, which can severely hinder the desired positioning accuracy. The proposed method overcomes this challenge by properly shaping the force distribution on the moving magnet plate, which is enabled by the presence of multiple coils interacting with the mover, corresponding to an “overactuation” scheme. As a consequence, the independent control of elementary deformation shapes (modes) is achieved. The proposed overactuation scheme is experimentally validated on a planar motor prototype, proving the efficiency of the proposed method during both standstill and motion.Keywords
Funding Information
- Dutch Organization for Scientific Research (13320)
- Ministry of Economic Affairs of the Netherlands
- Ministry of Innovation and Technology NRDI Office
- Autonomous Systems National Laboratory Program
This publication has 26 references indexed in Scilit:
- Exploiting additional actuators and sensors for nano-positioning robust motion controlMechatronics, 2014
- Data-based spatial feedforward for over-actuated motion systemsMechatronics, 2014
- Model-based spatial feedforward for over-actuated motion systemsMechatronics, 2013
- The deformation of the moving magnet plate of a commutated magnetically levitated planar actuatorMechatronics, 2013
- Ultra-precision engineering in lithographic exposure equipment for the semiconductor industryPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2012
- 6D direct-drive technology for planar motion stagesCIRP Annals, 2012
- Advanced Motion Control DesignElectrical Engineering Handbook, 2010
- Commutation of a Magnetically Levitated Planar Actuator with Moving-MagnetsIEEJ Transactions on Industry Applications, 2008
- Trajectory planning and feedforward design for electromechanical motion systemsControl Engineering Practice, 2005
- Electro-dynamic planar motorPrecision Engineering, 2004