Seismic Behavior Tests of Square Reinforced Concrete–Filled Steel Tube Columns Connected to RC Beam Joints
- 1 March 2019
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 145 (3)
Abstract
This paper proposes a joint system that connects the thin-walled square reinforced concrete–filled steel tube (RCFST) column to RC beams at both sides of the joint. In order to delay the local buckling of square steel tubes with high width-to-thickness ratio and enhance confinement effect on infilled concrete, diagonal stiffeners were welded to adjacent sides of the internal square steel tube and longitudinal bars were embedded in the square RCFST columns. Four RCFST joints with internal diaphragms were tested up to a large drift ratio of 6.7% under combined axial compression and reversed cyclic loading. All four specimens were designed according to the strong-column-weak-beam concept, and the strong-joint-weak-member seismic design philosophy. The cross-sectional dimensions of the RCFST column were . The dimensions of the beam cross section were and high-strength steel rebars (600 MPa) were adopted in the RC beams. The width-to-thickness ratio of the square joint tube and the level of axial load in the column were two important parameters to be studied. Two types of failure mode, i.e., beam flexural failure and beam flexural failure with bond failure, were observed. Both failure modes were ductile and the joints showed excellent seismic performance under cyclic loading. Based on the test results, some design considerations for the joints were recommended.
Keywords
This publication has 17 references indexed in Scilit:
- High-Strength Rectangular CFT Members: Database, Modeling, and Design of Short ColumnsJournal of Structural Engineering, 2018
- Stability Analysis and Design of Composite StructuresJournal of Structural Engineering, 2016
- Shear capacity of 3D composite CFT joints subjected to symmetric loading conditionJournal of Constructional Steel Research, 2015
- Developments and advanced applications of concrete-filled steel tubular (CFST) structures: MembersJournal of Constructional Steel Research, 2014
- Monotonic Loading Tests of Ring-Beam Connections for Steel Reinforced Concrete Columns and RC BeamsJournal of Structural Engineering, 2014
- Behaviour of composite joints with concrete encased CFST columns under cyclic loading: ExperimentsEngineering Structures, 2014
- Effects of Axial Compression Load and Eccentricity on Seismic Behavior of Nonseismically Detailed Interior Beam-Wide Column JointsJournal of Structural Engineering, 2009
- New Connection System for Confined Concrete Columns and Beams. II: Theoretical ModelingJournal of Structural Engineering, 2008
- New Connection System for Confined Concrete Columns and Beams. I: Experimental StudyJournal of Structural Engineering, 2008
- Seismic Design of Reinforced Concrete and Masonry Buildings1992