Assessment on Passive Cooling Techniques to Improve Steel Roof Thermal Performance in Hot Tropical Climate
Open Access
- 1 July 2014
- journal article
- Published by Science Publishing Group in International Journal of Energy and Power Engineering
- Vol. 3 (6) , 287-295
Abstract
In African hot tropical climate countries, due to climate and the unsuitability of construction materials, building’s indoor environment remains over the thermal comfort acceptable limit over long periods of time during the year. Among the building envelope components, roof is a critical part that is highly susceptible to solar radiation. Solutions like passive cooling and low energy consumption systems are not explored enough in those countries. These techniques and systems can be used to meet a large part of the cooling needs and reduce the overheating period in buildings, but their applicability depends on the climate zone. In this paper, investigations were conducted to determine their potential to improve steel roof performance for free running buildings under tropical climatic conditions. The case studies are two configurations (with and without attic) of typical steel roof in Burkina Faso. Using dynamic simulation, we have evaluated the impacts of radiant barrier, insulation, cool paint and ventilation for two configuration of roofing. For both configurations, high reflective solutions perform very well. It also appears that the attic case due to its actual configuration (shape and design) and to the climate conditions ventilation does not perform very well. These results can help building actors during the design process.Keywords
This publication has 17 references indexed in Scilit:
- Thermal performance of reflective materials applied to exterior building components—A reviewEnergy and Buildings, 2014
- Cool roofs impact on building thermal response: A French case studyEnergy and Buildings, 2011
- A naturally ventilated cavity roof as potential benefits for improving thermal environment and cooling load of a factory buildingEnergy and Buildings, 2011
- Ancient vernacular architecture: characteristics categorization and energy performance evaluationEnergy and Buildings, 2010
- Estimating the effect of using cool coatings on energy loads and thermal comfort in residential buildings in various climatic conditionsEnergy and Buildings, 2007
- Ventilation of spaces in a warm, humid climate—Case study of some housing typesRenewable Energy, 1997
- Design considerations for naturally ventilated buildingsRenewable Energy, 1994
- The challenge faced by the building materials industries in the developing countries in the 1990s: with special reference to TanzaniaHabitat International, 1990
- Modeling daylight availability and irradiance components from direct and global irradianceSolar Energy, 1990
- The case for traditional housing in tropical AfricaHabitat International, 1979