Liquefaction resistance of carbonate sands from cone penetration tests
Authors:
- D. GirettiDGD. Giretti
- V. FioravanteVFV. Fioravante
Open Access
- 17 September 2024
- book chapter
- Published by Taylor & Francis
- p. 1136-1141
Abstract
Liquefaction assessment is normally carried out using semi-empirical approaches based on the pioneering study of Seed and Idriss (1982). The methods relate a penetration resistance measured in situ (preferably from cone penetration tests, CPTs) to observed instances of liquefaction and non-liquefaction of sandy deposits. However, the applicability of a simplified approach is questionable for materials which fall outside the range of silica sands and slightly silty sands for which it has been developed and extensively verified against field data. For such cases a more rigorous method is needed. Carbonate sands are well known and documented to behave differently from silica sands: at the same relative density, penetration resistance is generally lower than in siliceous sands, while cyclic laboratory testing indicates higher cyclic resistance. These observations cannot rationally be combined into the commonly used simplified liquefaction procedures. An experimental approach, based on the measured mechanical properties of the carbonate sands, is essential. This paper provides an example of calibration of liquefaction resistance from CPTU for a fill made of dredged carbonate sand, based on centrifuge CPTUs and cyclic laboratory tests.Keywords
This publication has 6 references indexed in Scilit:
- Mechanical properties of a carbonate sand from a dredged hydraulic fillGéotechnique, 2018
- CPT calibration and analysis for a carbonate sandGéotechnique, 2018
- Simple Shear Behavior of Calcareous and Quartz SandsGeotechnical and Geological Engineering, 2010
- Liquefaction Resistance of Soils: Summary Report from the 1996 NCEER and 1998 NCEER/NSF Workshops on Evaluation of Liquefaction Resistance of SoilsJournal of Geotechnical and Geoenvironmental Engineering, 2001
- Liquefaction of crushable soilsGéotechnique, 1998
- Liquefaction of K0-Consolidated Sand Under Cyclic Rotation of Principal Stress Direction With Lateral ConstraintSoils and Foundations, 1985