Modified epoxy formulation for improving the fracture resistance of filament wound pressure vessels
Authors:
- 1 January 1995
- journal article
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 9 (2) , 159-175
Abstract
—A modified epoxy composition for filament winding of pressure vessels was investigated. The system consisted of a DGEBA-type DER 332 epoxy resin, an aliphatic amine T-403 hardener, and an amine-terminated ATBN 1300X16 toughening agent. The design goal was to achieve a toughened system, with processing characteristics suitable for filament winding. The product should have an improved fracture toughness, with minimal sacrifice of its thermal and mechanical properties and general performance. Specifically it was sought to develop a composite material laminate in which the damaged zone caused by a high-energy penetrating impact is localized. The selected epoxy system was investigated in its bulk state with respect to its rheological, thermal, mechanical, and morphological behavior. Further testing included adhesive shear strength, composite tensile and shear strength, and fracture analysis. The ATBN modification of the epoxy system achieved most of the design objectives including pot life, glass transition temperature and ductility of the bulk epoxy, and improved fracture mechanism, with minimal sacrifice of the mechanical properties of the composite. This was achieved because of the ATBN contribution, both as a crosslinking agent and as a toughener. Morphological studies revealed the presence of a rubbery globular phase of 1 μm diameter, dispersed uniformly in the epoxy matrix, which was formed when ATBN was added. Fractured composite specimens showed that a better interfacial adhesion of the matrix to the fibers was achieved in the modified formulation.Keywords
This publication has 7 references indexed in Scilit:
- The Effect of Modification of an Epoxy Resin Adhesive with ATBN on Peel StrengthThe Journal of Adhesion, 1992
- The Influence of Epoxy Matrix Properties on Delivered Fiber Strength in Filament Wound Composite Pressure VesselsJournal of Reinforced Plastics and Composites, 1991
- Room Temperature Curing Epoxy Adhesives for Elevated Temperature Service, Part II: Composition, Properties, Microstructure RelationshipsThe Journal of Adhesion, 1990
- Room Temperature Curing Epoxy Adhesives for Elevated Temperature ServiceThe Journal of Adhesion, 1987
- Rubber‐modified epoxies. II. Morphology and mechanical propertiesJournal of Applied Polymer Science, 1981
- Rubber‐modified epoxies. I. Transitions and morphologyJournal of Applied Polymer Science, 1981
- An epoxy resin‐elastomer system for filament windingPolymer Composites, 1980