Preparation of W-Plated Diamond and Improvement of Thermal Conductivity of Diamond-WC-Cu Composite
Open Access
Abstract
The tungsten (W)-plated diamond process was explored and optimized. A dense and uniform tungsten coating with a thickness of 900 nm was successfully prepared by the powder covering sintering method. The Diamond-WC-Cu composite with high density and high thermal conductivity were successfully prepared by cyclic vacuum pressure infiltration. The microstructure and composition of the W-plated diamond particles were analyzed. The effect of tungsten coating on the microstructure and thermal conductivity of the Diamond-WC-Cu composite was investigated. After calculation, the interface thermal resistance of the composite forming the tungsten carbide transition layer is 2.11 × 10−8 m2∙K∙W−1. The thermal conductivity average value of the Diamond-WC-Cu composite with a diamond volume fraction of 60% reaches 874 W∙m−1∙K−1, which is close to the theoretical prediction value of Hasselman-Johnson (H-J) model and differential effective medium (DEM) model. Moreover, the Maxwell-Eucken (M-E) model, H-J model, and DEM model were used to evaluate the thermal conductivity of the Diamond-WC-Cu composite.Keywords
This publication has 39 references indexed in Scilit:
- Preparation of copper–diamond composites with chromium carbide coatings on diamond particles for heat sink applicationsApplied Thermal Engineering, 2013
- Si-Coated Diamond Particles Reinforced Copper Composites Fabricated by Spark Plasma Sintering ProcessMaterials and Manufacturing Processes, 2013
- Review of metal matrix composites with high thermal conductivity for thermal management applicationsProgress in Natural Science: Materials International, 2011
- High thermal conductivity composites consisting of diamond filler with tungsten coating and copper (silver) matrixJournal of Materials Science, 2010
- Thermal conductivity of SPS consolidated Cu/diamond composites with Cr-coated diamond particlesJournal of Alloys and Compounds, 2010
- Calculation of surface energy and simulation of reconstruction for diamond cubic crystals (001) surfaceApplied Surface Science, 2008
- Assessing predictive schemes for thermal conductivity against diamond-reinforced silver matrix composites at intermediate phase contrastScripta Materialia, 2007
- Kinetics of the graphitization of dispersed diamonds at “low” temperaturesJournal of Applied Physics, 2000
- Calculations for ledge energies on the diamond (111) surfaceSurface Science, 1993
- The effect of particle size on the thermal conductivity of ZnS/diamond compositesActa Metallurgica et Materialia, 1992