Experimental and numerical analysis of intermetallics in Al–Mg friction stir welds
Open Access
- 1 November 2023
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 10 (11) , 116511
Abstract
In this research work, it was aimed to analyse the thermal behaviour during FSW in order to understand the diffusion behaviour of Al (AA6061)-Mg (AZ31B) dissimilar joints. Three heat input levels at different weld pitch ratios (WPR) of 0.087, 0.068 and 0.051 are accounted for the analysis. Finite element modelling (FEM) is employed to predict temperature evolutions. From the FEM results and fundamental diffusion equations, the intermetallic thickness and the diffusion behaviour between the Al and Mg material were analyzed and found that the Al-rich intermetallic phases Al3Mg2 grow faster and wider than the Mg-rich phase Al12Mg17. Tensile test demonstrates that a lower welding pitch ratio (WPR) leads to the formation of thicker intermetallic layers, resulting in reduced tensile strength and joint efficiency. In contrast, a higher WPR (0.087) minimizes intermetallic thickness, yielding superior tensile properties (138mpa). Microhardness measurements at the stir zone reveal a broad range from 70 to 164 HV, signifying mechanical heterogeneity. Microstructural reveals that a complex interplay between Al and Mg materials, resulting in fine equiaxed grains, intermetallic compounds, and distinct flow patterns in the stir zone.Keywords
This publication has 26 references indexed in Scilit:
- Intermetallic Compounds in the Banded Structure and Their Effect on Mechanical Properties of Al/Mg Dissimilar Friction Stir Welding JointsJournal of Materials Science & Technology, 2017
- Experimental investigation and numerical analyses of residual stresses and distortions in GMA welding of thin dissimilar AA5052-AA6061 platesJournal of Manufacturing Processes, 2017
- Special grain boundaries in the nugget zone of friction stir welded AA6061-T6 under various welding parametersMaterials Science and Engineering: A, 2016
- Experimental and numerical investigation on under-water friction stir welding of armour grade AA2519-T87 aluminium alloyDefence Technology, 2016
- Characteristics of FSW and UWFSW joints of AA2519-T87 aluminium alloy: Effect of tool rotation speedJournal of Manufacturing Processes, 2016
- A metallurgical and mechanical study on dissimilar Friction Stir welding of aluminum 1050 to brass (CuZn30)Materials Science and Engineering: A, 2011
- Tensile properties of a friction stir welded magnesium alloy: Effect of pin tool thread orientation and weld pitchMaterials Science and Engineering: A, 2010
- Formation of Liquid and Intermetallics in Al-to-Mg Friction Stir WeldingMetallurgical and Materials Transactions A, 2010
- Microstructure characteristics in TIG welded joint of Mg/Al dissimilar materialsMaterials Letters, 2007
- Dissimilar material laser welding between magnesium alloy AZ31B and aluminum alloy A5052-OScience and Technology of Advanced Materials, 2005