Murugasen Subramanian
Murugasen Subramanian has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Arumugam Geetha
Centre for Environmental Research, Department of Chemistry , Kongu Engineering College (Autonomous) , Perundurai , Erode , Tamil Nadu , India
1 shared publication - Babu Aravinth
Dr. Navalar Nedunchezhiyan College of Engineering
1 shared publication - Chandrasekaran Sowmya Dhanalakshmi
SNS College of Technology, India
1 shared publication - M Naveenkumar
SNS College of Technology, Coimbatore, Coimbatore, 641035, INDIA
1 shared publication - Murugesan Sakthivel
Department of Mechanical Engineering, Anna University Regional Campus, Coimbatore, India
1 shared publication - P Janagarathinam
Department of Mechanical Engineering, SNS College of Technology, Coimbatore, Tamil Nadu-641035, India
1 shared publication
Latest Publications
- 28 November 2024
- Published by Kaunas University of Technology (KTU) in Materials Science
- Vol. 30 (4) , 480-485
Development of a Novel Wear Equation by Comparing the Wear Behaviour of Hard (AA7075) and Soft (AA6063) Hybrid Composite Materials
In this research, aluminium alloys AA7075 and AA6063 were reinforced with aluminium oxide and titanium oxide particles fabricated through stir casting. The Archard equation was used to model wear behavior, with the wear rate and hardness ratios determined experimentally. The addition of reinforcing particles improves hardness and wear resistance by impeding dislocation movement and refining grain size. At higher temperatures, a protective oxide layer forms, reducing wear. The wear rate decreases with increasing reinforcement percentage and increases with sliding distance. AA7075 exhibits lower wear rates than AA6063, especially at higher temperatures, due to its higher hardness. The developed wear equation in this study relates the wear rates of harder (AA7075) and softer (AA6063) composite materials by considering factors such as % reinforcement, load, sliding distance, velocity, and temperature. The equation considers the change in the wear rate of aluminium composites with respect to temperature, represented by dv/dT and accounts for the effect of temperature on wear behavior through the temperature coefficients (ɑ and β). The equation takes into deliberation the impact of these parameters on wear behavior, offering a mathematical foundation for understanding and comparing wear performance across different materials.
- 28 November 2024
- Published by Kaunas University of Technology (KTU) in Materials Science
- Vol. 30 (4) , 480-485
Development of a Novel Wear Equation by Comparing the Wear Behaviour of Hard (AA7075) and Soft (AA6063) Hybrid Composite Materials
In this research, aluminium alloys AA7075 and AA6063 were reinforced with aluminium oxide and titanium oxide particles fabricated through stir casting. The Archard equation was used to model wear behavior, with the wear rate and hardness ratios determined experimentally. The addition of reinforcing particles improves hardness and wear resistance by impeding dislocation movement and refining grain size. At higher temperatures, a protective oxide layer forms, reducing wear. The wear rate decreases with increasing reinforcement percentage and increases with sliding distance. AA7075 exhibits lower wear rates than AA6063, especially at higher temperatures, due to its higher hardness. The developed wear equation in this study relates the wear rates of harder (AA7075) and softer (AA6063) composite materials by considering factors such as % reinforcement, load, sliding distance, velocity, and temperature. The equation considers the change in the wear rate of aluminium composites with respect to temperature, represented by dv/dT and accounts for the effect of temperature on wear behavior through the temperature coefficients (ɑ and β). The equation takes into deliberation the impact of these parameters on wear behavior, offering a mathematical foundation for understanding and comparing wear performance across different materials.
- Open Access
- 1 February 2024
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (2) , 026504
Investigation of machining rate and surface roughness in wire EDM of Al6063/WC/ZrO2 composite using response surface methodology
The aim of the current work is to explore the machinability behavior of Al6063/WC/ZrO2 metal matrix composites (MMC) produced through a stir casting process through wire electrical discharge machining (WEDM) process. In order to examine the effects of process parameters such as voltage (V), pulse on time (Ton) and pulse off time (Toff) on material removal rate (MRR) and surface roughness (SR), the experiments were conducted by adapting Response Surface Methodology (RSM) in conjunction with the central composite design (CCD). A second-order regression model has been developed to predict the response parameters and an analysis of variance (ANOVA) was performed to validate the significance of the models. Using the desirability function approach, the parameters were set for the highest MRR and the minimum SR value. The prediction was within a tolerable average error range. A total of 19 sets of tests were developed to obtain six possible solutions. The most suitable solution among these six has been found by a confirmatory experiment. The results indicate that voltage and its interactions have significantly affected both the responses than Ton and Toff. Overall, it can be said that the study of the Al6063/WC/ZrO2 MMCs using WEDM process parameters demonstrated improved casting and machining qualities.
- 1 February 2024
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (2) , 026504
Open AccessInvestigation of machining rate and surface roughness in wire EDM of Al6063/WC/ZrO2 composite using response surface methodology
The aim of the current work is to explore the machinability behavior of Al6063/WC/ZrO2 metal matrix composites (MMC) produced through a stir casting process through wire electrical discharge machining (WEDM) process. In order to examine the effects of process parameters such as voltage (V), pulse on time (Ton) and pulse off time (Toff) on material removal rate (MRR) and surface roughness (SR), the experiments were conducted by adapting Response Surface Methodology (RSM) in conjunction with the central composite design (CCD). A second-order regression model has been developed to predict the response parameters and an analysis of variance (ANOVA) was performed to validate the significance of the models. Using the desirability function approach, the parameters were set for the highest MRR and the minimum SR value. The prediction was within a tolerable average error range. A total of 19 sets of tests were developed to obtain six possible solutions. The most suitable solution among these six has been found by a confirmatory experiment. The results indicate that voltage and its interactions have significantly affected both the responses than Ton and Toff. Overall, it can be said that the study of the Al6063/WC/ZrO2 MMCs using WEDM process parameters demonstrated improved casting and machining qualities.
- Open Access
- 1 November 2023
- Published by IOP Publishing in Materials Research Express
- Vol. 10 (11) , 116511
Experimental and numerical analysis of intermetallics in Al–Mg friction stir welds
In this research work, it was aimed to analyse the thermal behaviour during FSW in order to understand the diffusion behaviour of Al (AA6061)-Mg (AZ31B) dissimilar joints. Three heat input levels at different weld pitch ratios (WPR) of 0.087, 0.068 and 0.051 are accounted for the analysis. Finite element modelling (FEM) is employed to predict temperature evolutions. From the FEM results and fundamental diffusion equations, the intermetallic thickness and the diffusion behaviour between the Al and Mg material were analyzed and found that the Al-rich intermetallic phases Al3Mg2 grow faster and wider than the Mg-rich phase Al12Mg17. Tensile test demonstrates that a lower welding pitch ratio (WPR) leads to the formation of thicker intermetallic layers, resulting in reduced tensile strength and joint efficiency. In contrast, a higher WPR (0.087) minimizes intermetallic thickness, yielding superior tensile properties (138mpa). Microhardness measurements at the stir zone reveal a broad range from 70 to 164 HV, signifying mechanical heterogeneity. Microstructural reveals that a complex interplay between Al and Mg materials, resulting in fine equiaxed grains, intermetallic compounds, and distinct flow patterns in the stir zone.
- 1 November 2023
- Published by IOP Publishing in Materials Research Express
- Vol. 10 (11) , 116511
Open AccessExperimental and numerical analysis of intermetallics in Al–Mg friction stir welds
In this research work, it was aimed to analyse the thermal behaviour during FSW in order to understand the diffusion behaviour of Al (AA6061)-Mg (AZ31B) dissimilar joints. Three heat input levels at different weld pitch ratios (WPR) of 0.087, 0.068 and 0.051 are accounted for the analysis. Finite element modelling (FEM) is employed to predict temperature evolutions. From the FEM results and fundamental diffusion equations, the intermetallic thickness and the diffusion behaviour between the Al and Mg material were analyzed and found that the Al-rich intermetallic phases Al3Mg2 grow faster and wider than the Mg-rich phase Al12Mg17. Tensile test demonstrates that a lower welding pitch ratio (WPR) leads to the formation of thicker intermetallic layers, resulting in reduced tensile strength and joint efficiency. In contrast, a higher WPR (0.087) minimizes intermetallic thickness, yielding superior tensile properties (138mpa). Microhardness measurements at the stir zone reveal a broad range from 70 to 164 HV, signifying mechanical heterogeneity. Microstructural reveals that a complex interplay between Al and Mg materials, resulting in fine equiaxed grains, intermetallic compounds, and distinct flow patterns in the stir zone.
- 18 July 2014
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 39 (10) , 7299-7313
Modeling and Analysis of Surface Roughness of AL7075-T6 in End Milling Process Using Response Surface Methodology
- 18 July 2014
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 39 (10) , 7299-7313
Modeling and Analysis of Surface Roughness of AL7075-T6 in End Milling Process Using Response Surface Methodology