Study on High-Temperature Low-Cycle Fatigue Behavior of the FGH96 Superalloy Based on Internal Stress Division
Open Access
Abstract
In order to deeply explore the high-temperature cyclic characteristics of the FGH96 superalloy under different strain amplitudes, the high-temperature low-cycle fatigue behavior of the FGH96 superalloy was analyzed from the perspective of internal stress evolution. Four sets of strain amplitude (0.5%, 0.6%, 0.8%, and 1.2%) controlled high-temperature low-cycle fatigue tests were carried out on the FGH96 superalloy at 550 °C, and the internal stress was divided into back stress and effective stress through the cyclic stress-strain curves. The results show that the cyclic softening/hardening characteristics of the FGH96 superalloy under different strain amplitudes are closely related to the evolution of internal stress. The strain amplitude has a significant effect on the back stress of the FGH96 superalloy but has little effect on effective stress. At low strain amplitudes (0.5% and 0.6%), the back stress evolution rate of the FGH96 superalloy is lower than effective stress, and the material mainly exhibits cyclic softening. At high strain amplitudes (0.8% and 1.2%), the back stress evolution rate of the FGH96 superalloy is significantly higher than effective stress, and the material exhibits cyclic hardening. The combined effect of back stress and effective stress is the main reason for the different low-cycle fatigue behaviors of the FGH96 superalloy under different strain amplitudes.Keywords
This publication has 27 references indexed in Scilit:
- Effect of cyclic loadings on stress relaxation behaviors of 9–12%Cr steel at high temperatureMechanics of Materials, 2021
- Unified constitutive modeling of Haynes 230 including cyclic hardening/softening and dynamic strain aging under isothermal low-cycle fatigue and fatigue-creep loadsInternational Journal of Plasticity, 2021
- An improved elasto-plastic constitutive model for the exquisite description of stress-strain hysteresis loops with cyclic hardening and softening effectsMechanics of Materials, 2020
- The high temperature flow behavior of additively manufactured Inconel 625 superalloyMaterials Research Express, 2019
- Effect of stacking fault energy on microstructural feature and back stress hardening in Cu-Al alloys subjected to surface mechanical attrition treatmentMaterials Science and Engineering: A, 2019
- Cyclic softening behaviors of modified 9–12%Cr steel under different loading modes: Role of loading levelsInternational Journal of Mechanical Sciences, 2017
- A study of the back stress and the friction stress behaviors of Ti-6Al-4V alloy during low cycle fatigue at room temperatureMaterials Science and Engineering: A, 2017
- Low cycle fatigue and ratcheting behavior of 35CrMo structural steel at elevated temperatureNuclear Engineering and Design, 2017
- Evolution of Relationships Between Dislocation Microstructures and Internal Stresses of AISI 316L During Cyclic Loading at 293 K and 573 K (20 °C and 300 °C)Metallurgical and Materials Transactions A, 2013
- Dislocation behavior in fatigue II. Friction stress and back stress as inferred from an analysis of hysteresis loopsMaterials Science and Engineering, 1979