Spray Formation of High Pressure Swirl Gasoline Injectors Investigated by Two-Dimensional Mie and LIEF Techniques
Authors:
- 1 March 1999
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Two-dimensional Mie and LIEF techniques were applied to investigate the spray formation of a high pressure gasoline swirl injector in a constant volume chamber. The results obtained provide information on the propagation of liquid fuel and fuel vapor for different fuel pressures and ambient conditions. Spray parameters like tip penetration, cone angles and two new defined parameters describing the radial fuel distribution were used to quantify the fuel distributions measured. Simultaneous detection of liquid and vapor fuel was applied to study the influence of ambient temperature, injector temperature and ambient pressure on the evaporating spray.Keywords
This publication has 19 references indexed in Scilit:
- Development of Gasoline Direct Injection EngineSAE International Journal of Advances and Current Practices in Mobility, 1997
- Development of Direct Injection Gasoline EngineSAE International Journal of Advances and Current Practices in Mobility, 1997
- Direct Fuel Injection - A Study of Injector Requirements for Different Mixture Preparation ConceptsSAE International Journal of Advances and Current Practices in Mobility, 1997
- Analysis of a Direct Injected Gasoline EngineSAE International Journal of Advances and Current Practices in Mobility, 1997
- Understanding the Thermodynamics of Direct Injection Spark Ignition (DISI) Combustion Systems: An Analytical and Experimental InvestigationSAE International Journal of Advances and Current Practices in Mobility, 1996
- Combustion Control Technologies for Direct Injection SI EngineSAE International Journal of Advances and Current Practices in Mobility, 1996
- Gasoline Direct Injection: Actual Trends and Future Strategies for Injection and Combustion SystemsSAE International Journal of Advances and Current Practices in Mobility, 1996
- Unsteady Gasoline Injection Experiments: Comparison of Measurements in Quiescent Air and in a Model Intake PortSAE International Journal of Advances and Current Practices in Mobility, 1995
- Atomization and Sprays1988
- The Effects of Design and Operating Conditions of Fuel Injectors on Flow and AtomizationSAE International Journal of Advances and Current Practices in Mobility, 1987