Experimental and Simulation Studies on Thermal Shock of Multilayer Thermal Barrier Coatings with an Intermediate Transition Layer at 1500 °C
Open Access
Abstract
Strain tolerance is a crucial factor affecting the thermal life of coatings, and a higher strain tolerance can effectively alleviate the thermal stresses on coatings during thermal shock. To improve the strain tolerance, the coating structure was optimized by introducing an intermediate transition layer in this study. The intermediate transition layer material was prepared using a 1:1 volume ratio mixture of 6–8 wt. % Yttria-stabilized zirconia (YSZ) and NiCrAlY powders in the experiments. The coating structure consisted of an Al2O3-GdAlO3 (AGAP) anti-erosion layer, a YSZ layer, an intermediate transition layer, and a bonding layer from top to bottom. After thermal shock experiments at 1500 °C, the coatings with the addition of the intermediate transition layer exhibited different failure modes, with the crack location shifting from between the YSZ and the bonding layer to within the intermediate transition layer, compared to the coatings without the intermediate transition layer. Finite element simulation analysis showed that the intermediate transition layer effectively increased the strain tolerance of the coating and significantly reduced the thermal stress. Furthermore, incorporating an embedded micron agglomerated particle-based (EMAP) thermal barrier coating structure into the intermediate transition layer effectively alleviated thermal stresses and enhanced the coating’s thermal insulation performance.Keywords
Funding Information
- Science Center for Gas Turbine Project (P2021-A-IV-002-002, D050101, 2023YFB3711200, 52175136, 52130511)
- Civil Space ’the 14th Five-Year Plan’ Pre-research Project (P2021-A-IV-002-002, D050101, 2023YFB3711200, 52175136, 52130511)
- National High Technology Research and Development Program of China (P2021-A-IV-002-002, D050101, 2023YFB3711200, 52175136, 52130511)
- National Natural Science Foundation of China (P2021-A-IV-002-002, D050101, 2023YFB3711200, 52175136, 52130511)
This publication has 46 references indexed in Scilit:
- First-principles calculations and thermal-mechanical experimental studies on middle-entropy rare-earth disilicatesCeramics International, 2024
- CMAS infiltration behavior of atmospheric plasma-sprayed thermal barrier coating with tailored pore structuresCeramics International, 2023
- Long lifespan thermal barrier coatings overview: Materials, manufacturing, failure mechanisms, and multiscale structural designCeramics International, 2022
- Thermal Shock Resistance and Bonding Strength of Novel-Structured Thermal Barrier Coatings with Different MicrostructureJournal of Thermal Spray Technology, 2022
- Sintering characteristics of plasma-sprayed TBCs: Experimental analysis and an overall modellingCeramics International, 2018
- Latest Researches Advances of Plasma Spraying: From Splat to Coating FormationJournal of Thermal Spray Technology, 2016
- Comparison of thermal shock resistances of plasma-sprayed nanostructured and conventional yttria stabilized zirconia thermal barrier coatingsCeramics International, 2012
- Microstructure and Thermal Properties of Plasma Sprayed Thermal Barrier Coatings from Nanostructured YSZJournal of Thermal Spray Technology, 2010
- Technical and Economical Aspects of Current Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD: A ReviewJournal of Thermal Spray Technology, 2008
- A review of microstructure and properties of plasma sprayed ceramic coatingsSurface and Coatings Technology, 1989