Tensile strength grading of beech (Fagus sylvatica L.) lamellas from multiple origins, cross sections and qualities
- 10 February 2022
- journal article
- research article
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 76 (5) , 397-407
Abstract
The market share of European beech (Fagus sylvatica L.) wood in the construction sector is low despite an increase in beech stock in Central European Forests in recent years. More efficient sawing techniques, higher lamella grading yields and solving of adhesion challenges may increase the competitiveness of beech glulam and promote its use. The aim of this paper is to revise the lamella grading system in the current German technical approval for beech glulam Z-9.1-679:2019 (DIBt (2019). BS-Holz aus Buche und BS-Holz Buche Hybridträger und zugehörige Bauarten. Allgemeine bauaufsichtliche Zulassung Z-9.1-679:2019. Deutsches Institut für Bautechnik) and to suggest modifications in the lamella grading rules for glulam production allowing higher yields and reliable tensile strength values at the same time. The unique dataset in this study combined different origins of lamellas and covered a wide range of visual, physical and mechanical wood characteristics including a high amount of low quality material. Indicating properties (IPs) for tensile strength, such as knot parameters and dynamic modulus of elasticity, were contrasted with tensile strength and static modulus of elasticity. Beech lamellas, graded by means of Z-9.1-679:2019 (DIBt (2019). BS-Holz aus Buche und BS-Holz Buche Hybridträger und zugehörige Bauarten. Allgemeine bauaufsichtliche Zulassung Z-9.1-679:2019. Deutsches Institut für Bautechnik), did not achieve the tensile strengths required for glulam production in many grading classes and the yield was low. A machine grading approach with dynamic modulus of elasticity as a single grading criterion gave higher yields than the current grading procedure and high reliability for tensile strength prediction with a prediction accuracy of R2 = 0.67.Keywords
Funding Information
- Bavarian State Institute of ForestryNot found (G2/N/19/05)
- German Federal Ministry of Food and AgricultureNot found (FKZ 22025114)
This publication has 13 references indexed in Scilit:
- Structural products made of beech wood: quality assessment of the raw materialEuropean Journal of Wood and Wood Products, 2020
- European beech (Fagus sylvatica L.) glued laminated timber: lamination strength grading, production and mechanical propertiesEuropean Journal of Wood and Wood Products, 2020
- Prediction of tensile strength of sawn timber: definitions and performance of indicating properties based on surface laser scanning and dynamic excitationMaterials and Structures, 2020
- Impact of species mixture on the stiffness of European beech (Fagus sylvatica L.) sawn timberForest Ecology and Management, 2020
- European beech log and lumber grading in wet and dry conditions using longitudinal vibrationHolzforschung, 2020
- An advanced virtual grading method for wood based on surface information of knotsWood Science and Technology, 2019
- Mechanical properties and their interrelationships for medium-density European hardwoods, focusing on ash and beechWood Material Science & Engineering, 2019
- Visual and machine strength grading of European ash and maple for glulam applicationHolzforschung, 2019
- Efficiency of the machine grading of chestnut structural timber: prediction of strength classes by dry and wet measurementsMaterials and Structures, 2016
- Automatic measurement of fiber orientation in softwoods by using the tracheid effectComputers and Electronics in Agriculture, 2003