RO-LOAM: 3D Reference Object-based Trajectory and Map Optimization in LiDAR Odometry and Mapping
- 25 May 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 7 (3) , 6806-6813
Abstract
We propose an extension to the LiDAR Odometry and Mapping framework (LOAM) that enables reference object-based trajectory and map optimization. Our approach assumes that the location and geometry of a large reference object are known, e.g., as a CAD model from Building Information Modeling (BIM) or a previously captured dense point cloud model. We do not expect the reference object to be present in every LiDAR scan. Our approach uses the poses of the LOAM algorithm as an initial guess to refine them with scan-to-model alignment. To evaluate if the alignment was accurate, an EKF-based motion prior filtering step is employed. Subsequently, the past trajectory is optimized by adding the model-aligned pose as a pose graph constraint and the map of the LOAM algorithm is corrected to improve future localization and mapping. We evaluate our approach with data captured in a visual airplane inspection scenario inside an aircraft hangar. A 3D LiDAR sensor is mounted via a gimbal on an Unmanned Aerial Vehicle (UAV) and is continuously actuated. We compare the localization accuracy of the LOAM and R-LOAM algorithms when enabling or disabling our proposed reference object-based trajectory and map optimization extension. For three recorded datasets, enabling the proposed extension yields a reduction in Absolute Pose Error compared to conventional LOAM and R-LOAM, while being able to run online. This reduces drift and improves map quality.Keywords
Funding Information
- Space Agency of the German Aerospace Center
- Federal Ministry for Economic Affairs and Climate Action on the basis of a resolution of the German Bundestag (20X1707C)
This publication has 25 references indexed in Scilit:
- SLAM auto-complete: Completing a robot map using an emergency map2017
- A LiDAR and IMU Integrated Indoor Navigation System for UAVs and Its Application in Real-Time Pipeline ClassificationSensors, 2017
- Continuous mapping and localization for autonomous navigation in rough terrain using a 3D laser scannerRobotics and Autonomous Systems, 2017
- LIDAR-inertial integration for UAV localization and mapping in complex environments2016
- Real-time loop closure in 2D LIDAR SLAM2016
- Autonomous repositioning and localization of an in situ fabricator2016
- Low-drift and real-time lidar odometry and mappingAutonomous Robots, 2016
- Multilayered Mapping and Navigation for Autonomous Micro Aerial VehiclesJournal of Field Robotics, 2015
- Development and calibration of KaRoLa, a compact, high-resolution 3D laser scanner2014
- Fast Registration Based on Noisy Planes With Unknown Correspondences for 3-D MappingIEEE Transactions on Robotics, 2010