Martin Oelsch
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Martin Oelsch has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Eckehard Steinbach
Technical University of Munich Munich Germany
5 shared publications - Mojtaba Karimi
Chair of Media Technology of the Department of Electrical and Computer Engineering, and the Munich Institute of Robotics and Machine Intelligence, Technical University of Munich, Munich, Germany
4 shared publications - Edwin Babaians
Technical University of Munich, Munich, Germany
2 shared publications - Tamay Aykut
Department of Electrical and Computer Engineering, Technical University of Munich, Munich, Germany
2 shared publications Adrian Garcea
Chair of Media Technology, Technical University of Munich, Department of Electrical and Computer Engineering, Arcisstr. 21, Munich, 80333, Germany
1 shared publication- Dominik Van Opdenbosch
Chair of Media Technology, Technical University of Munich, Department of Electrical and Computer Engineering, Arcisstr. 21, Munich, 80333, Germany
1 shared publication
Latest Publications
- 25 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 7 (3) , 6806-6813
RO-LOAM: 3D Reference Object-based Trajectory and Map Optimization in LiDAR Odometry and Mapping
We propose an extension to the LiDAR Odometry and Mapping framework (LOAM) that enables reference object-based trajectory and map optimization. Our approach assumes that the location and geometry of a large reference object are known, e.g., as a CAD model from Building Information Modeling (BIM) or a previously captured dense point cloud model. We do not expect the reference object to be present in every LiDAR scan. Our approach uses the poses of the LOAM algorithm as an initial guess to refine them with scan-to-model alignment. To evaluate if the alignment was accurate, an EKF-based motion prior filtering step is employed. Subsequently, the past trajectory is optimized by adding the model-aligned pose as a pose graph constraint and the map of the LOAM algorithm is corrected to improve future localization and mapping. We evaluate our approach with data captured in a visual airplane inspection scenario inside an aircraft hangar. A 3D LiDAR sensor is mounted via a gimbal on an Unmanned Aerial Vehicle (UAV) and is continuously actuated. We compare the localization accuracy of the LOAM and R-LOAM algorithms when enabling or disabling our proposed reference object-based trajectory and map optimization extension. For three recorded datasets, enabling the proposed extension yields a reduction in Absolute Pose Error compared to conventional LOAM and R-LOAM, while being able to run online. This reduces drift and improves map quality.
- 25 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 7 (3) , 6806-6813
RO-LOAM: 3D Reference Object-based Trajectory and Map Optimization in LiDAR Odometry and Mapping
We propose an extension to the LiDAR Odometry and Mapping framework (LOAM) that enables reference object-based trajectory and map optimization. Our approach assumes that the location and geometry of a large reference object are known, e.g., as a CAD model from Building Information Modeling (BIM) or a previously captured dense point cloud model. We do not expect the reference object to be present in every LiDAR scan. Our approach uses the poses of the LOAM algorithm as an initial guess to refine them with scan-to-model alignment. To evaluate if the alignment was accurate, an EKF-based motion prior filtering step is employed. Subsequently, the past trajectory is optimized by adding the model-aligned pose as a pose graph constraint and the map of the LOAM algorithm is corrected to improve future localization and mapping. We evaluate our approach with data captured in a visual airplane inspection scenario inside an aircraft hangar. A 3D LiDAR sensor is mounted via a gimbal on an Unmanned Aerial Vehicle (UAV) and is continuously actuated. We compare the localization accuracy of the LOAM and R-LOAM algorithms when enabling or disabling our proposed reference object-based trajectory and map optimization extension. For three recorded datasets, enabling the proposed extension yields a reduction in Absolute Pose Error compared to conventional LOAM and R-LOAM, while being able to run online. This reduces drift and improves map quality.
- 19 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 2248-2255
LoLa-SLAM: Low-Latency LiDAR SLAM Using Continuous Scan Slicing
Real-time 6D pose estimation is a key component for autonomous indoor navigation of Unmanned Aerial Vehicles (UAVs). This letter presents a low-latency LiDAR SLAM framework based on LiDAR scan slicing and concurrent matching, called LoLa-SLAM. Our framework uses sliced point cloud data from a rotating LiDAR in a concurrent multi-threaded matching pipeline for 6D pose estimation with high update rate and low latency. The LiDAR is actuated using a 2D Lissajous spinning pattern to overcome the sensor's limited FoV. We propose a two-dimensional roughness model to extract the feature points for fine matching and registration of the point cloud. In addition, the pose estimator engages a temporal motion predictor that assists in finding the feature correspondences in the map for the fast convergence of the non-linear optimizer. Subsequently, an Extended Kalman Filter (EKF) is adopted for final pose fusion. The framework is evaluated in multiple experiments by comparing the accuracy, latency, and the update rate of the pose estimation for the trajectories flown in an indoor environment. We quantify the superior quality of the generated volumetric map in comparison to the state-of-the-art frameworks. We further examine the localization precision using ground truth pose information recorded by a total station unit.
- 19 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 2248-2255
LoLa-SLAM: Low-Latency LiDAR SLAM Using Continuous Scan Slicing
Real-time 6D pose estimation is a key component for autonomous indoor navigation of Unmanned Aerial Vehicles (UAVs). This letter presents a low-latency LiDAR SLAM framework based on LiDAR scan slicing and concurrent matching, called LoLa-SLAM. Our framework uses sliced point cloud data from a rotating LiDAR in a concurrent multi-threaded matching pipeline for 6D pose estimation with high update rate and low latency. The LiDAR is actuated using a 2D Lissajous spinning pattern to overcome the sensor's limited FoV. We propose a two-dimensional roughness model to extract the feature points for fine matching and registration of the point cloud. In addition, the pose estimator engages a temporal motion predictor that assists in finding the feature correspondences in the map for the fast convergence of the non-linear optimizer. Subsequently, an Extended Kalman Filter (EKF) is adopted for final pose fusion. The framework is evaluated in multiple experiments by comparing the accuracy, latency, and the update rate of the pose estimation for the trajectories flown in an indoor environment. We quantify the superior quality of the generated volumetric map in comparison to the state-of-the-art frameworks. We further examine the localization precision using ground truth pose information recorded by a total station unit.
- 18 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 2068-2075
R-LOAM: Improving LiDAR Odometry and Mapping With Point-to-Mesh Features of a Known 3D Reference Object
LiDAR-based odometry and mapping is used in many robotic applications to retrieve the robot's position in an unknown environment and allows for autonomous operation in GPS-denied (e.g., indoor) environments. With a 3D LiDAR sensor, highly accurate localization becomes possible, which enables high quality 3D reconstruction of the environment. In this letter we extend the well-known LOAM framework by leveraging prior knowledge about a reference object in the environment to further improve the localization accuracy. This requires a known 3D model of the reference object and its known position in a global coordinate frame. Instead of only relying on the point features in the mapping module of LOAM, we also include mesh features extracted from the 3D triangular mesh of the reference object in the optimization problem. For fast correspondence computation of mesh features, we use the Axis-Aligned-Bounding-Box-Tree (AABB) structure. Essentially, our approach not only makes use of the previously built map for absolute localization in the environment, but also takes the relative position to the reference object into account, effectively reducing long-term drift. To validate the proposed concept, we generated datasets using the Gazebo simulation environment in exemplary visual inspection scenarios of an airplane inside a hangar and the Eiffel Tower. An actuated 3D LiDAR sensor is mounted via a 1-DoF gimbal on a UAV capturing 360° scans. We benchmark our approach against the state-of-the-art open-source LOAM framework. The results show that the proposed joint optimization using both point and mesh features yields a significant reduction in Absolute Pose Error (APE) and therefore improves the map and 3D reconstruction quality during long-term operations.
- 18 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 2068-2075
R-LOAM: Improving LiDAR Odometry and Mapping With Point-to-Mesh Features of a Known 3D Reference Object
LiDAR-based odometry and mapping is used in many robotic applications to retrieve the robot's position in an unknown environment and allows for autonomous operation in GPS-denied (e.g., indoor) environments. With a 3D LiDAR sensor, highly accurate localization becomes possible, which enables high quality 3D reconstruction of the environment. In this letter we extend the well-known LOAM framework by leveraging prior knowledge about a reference object in the environment to further improve the localization accuracy. This requires a known 3D model of the reference object and its known position in a global coordinate frame. Instead of only relying on the point features in the mapping module of LOAM, we also include mesh features extracted from the 3D triangular mesh of the reference object in the optimization problem. For fast correspondence computation of mesh features, we use the Axis-Aligned-Bounding-Box-Tree (AABB) structure. Essentially, our approach not only makes use of the previously built map for absolute localization in the environment, but also takes the relative position to the reference object into account, effectively reducing long-term drift. To validate the proposed concept, we generated datasets using the Gazebo simulation environment in exemplary visual inspection scenarios of an airplane inside a hangar and the Eiffel Tower. An actuated 3D LiDAR sensor is mounted via a 1-DoF gimbal on a UAV capturing 360° scans. We benchmark our approach against the state-of-the-art open-source LOAM framework. The results show that the proposed joint optimization using both point and mesh features yields a significant reduction in Absolute Pose Error (APE) and therefore improves the map and 3D reconstruction quality during long-term operations.
- Open Access
- 17 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Skewed-redundant Hall-effect Magnetic Sensor Fusion for Perturbation-free Indoor Heading Estimation
Robust attitude and heading estimation with respect to a known reference is an essential component for indoor localization in robotic applications. Affordable Attitude and Heading Reference Systems (AHRS) are typically using 9-axis solid-state MEMS-based sensors. The accuracy of heading estimation on such a system depends on the Earth’s magnetic field measurement accuracy. The measurement of the Earth’s magnetic field using MEMS-based magnetometer sensors in an indoor environment, however, is strongly affected by external magnetic perturbations. This paper presents a novel approach for robust indoor heading estimation based on skewed-redundant magnetometer fusion. A tetrahedron platform based on Hall-effect magnetic sensors is designed to determine the Earth’s magnetic field with the ability to compensate for external magnetic field anomalies. Additionally, a correlation-based fusion technique is introduced for perturbation mitigation using the proposed skewed-redundant configuration. The proposed fusion technique uses a correlation coefficient analysis for determining the distorted axis and extracts the perturbation-free Earth’s magnetic field vector from the redundant magnetic measurement. Our experimental results show that the proposed scheme is able to successfully mitigate the anomalies in the magnetic field measurement and estimates the Earth’s true magnetic field. Using the proposed platform, we achieve a Root Mean Square Error of 12.74$\degree$ for indoor heading estimation without using an additional gyroscope.
- 17 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessSkewed-redundant Hall-effect Magnetic Sensor Fusion for Perturbation-free Indoor Heading Estimation
Robust attitude and heading estimation with respect to a known reference is an essential component for indoor localization in robotic applications. Affordable Attitude and Heading Reference Systems (AHRS) are typically using 9-axis solid-state MEMS-based sensors. The accuracy of heading estimation on such a system depends on the Earth’s magnetic field measurement accuracy. The measurement of the Earth’s magnetic field using MEMS-based magnetometer sensors in an indoor environment, however, is strongly affected by external magnetic perturbations. This paper presents a novel approach for robust indoor heading estimation based on skewed-redundant magnetometer fusion. A tetrahedron platform based on Hall-effect magnetic sensors is designed to determine the Earth’s magnetic field with the ability to compensate for external magnetic field anomalies. Additionally, a correlation-based fusion technique is introduced for perturbation mitigation using the proposed skewed-redundant configuration. The proposed fusion technique uses a correlation coefficient analysis for determining the distorted axis and extracts the perturbation-free Earth’s magnetic field vector from the redundant magnetic measurement. Our experimental results show that the proposed scheme is able to successfully mitigate the anomalies in the magnetic field measurement and estimates the Earth’s true magnetic field. Using the proposed platform, we achieve a Root Mean Square Error of 12.74$\degree$ for indoor heading estimation without using an additional gyroscope.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 7270-7277
Selection and Compression of Local Binary Features for Remote Visual SLAM
In the field of autonomous robotics, Simultaneous Localization and Mapping (SLAM) is still a challenging problem. With cheap visual sensors attracting more and more attention, various solutions to the SLAM problem using visual cues have been proposed. However, current visual SLAM systems are still computationally demanding, especially on embedded devices. In addition, collaborative SLAM approaches emerge using visual information acquired from multiple robots simultaneously to build a joint map. In order to address both challenges, we present an approach for remote visual SLAM where local binary features are extracted at the robot, compressed and sent over a network to a centralized powerful processing node running the visual SLAM algorithm. To this end, we propose a new feature coding scheme including a feature selection stage which ensures that only relevant information is transmitted. We demonstrate the effectiveness of our approach on well-known datasets. With the proposed approach, it is possible to build an accurate map while limiting the data rate to 75 kbits/frame.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 7270-7277
Selection and Compression of Local Binary Features for Remote Visual SLAM
In the field of autonomous robotics, Simultaneous Localization and Mapping (SLAM) is still a challenging problem. With cheap visual sensors attracting more and more attention, various solutions to the SLAM problem using visual cues have been proposed. However, current visual SLAM systems are still computationally demanding, especially on embedded devices. In addition, collaborative SLAM approaches emerge using visual information acquired from multiple robots simultaneously to build a joint map. In order to address both challenges, we present an approach for remote visual SLAM where local binary features are extracted at the robot, compressed and sent over a network to a centralized powerful processing node running the visual SLAM algorithm. To this end, we propose a new feature coding scheme including a feature selection stage which ensures that only relevant information is transmitted. We demonstrate the effectiveness of our approach on well-known datasets. With the proposed approach, it is possible to build an accurate map while limiting the data rate to 75 kbits/frame.