Cu-Doped Sb2Se3 Thin-Film Solar Cells Based on Hybrid Pulsed Electron Deposition/Radio Frequency Magnetron Sputtering Growth Techniques
Authors:
- Roberto JakominRJRoberto Jakomin
- Stefano RampinoStefano Rampino
- Giulia SpaggiariGSGiulia Spaggiari
- Michele CasappaMCMichele Casappa
- Giovanna TrevisiGTGiovanna Trevisi
- Elena Del CanaleECElena Del Canale
- Enos GombiaEGEnos Gombia
- Matteo BronzoniMBMatteo Bronzoni
- Kodjo Kekeli SossoeKodjo Kekeli Sossoe
- Francesco MezzadriFMFrancesco Mezzadri
- Francesco PattiniFrancesco Pattini
Open Access
Abstract
In recent years, research attention has increasingly focused on thin-film photovoltaics utilizing Sb2Se3 as an ideal absorber layer. This compound is favored due to its abundance, non-toxic nature, long-term stability, and the potential to employ various cost-effective and scalable vapor deposition (PVD) routes. On the other hand, improving passivation, surface treatment and p-type carrier concentration is essential for developing high-performance and commercially viable Sb2Se3 solar cells. In this study, Cu-doped Sb2Se3 solar devices were fabricated using two distinct PVD techniques, pulsed electron deposition (PED) and radio frequency magnetron sputtering (RFMS). Furthermore, 5%Cu:Sb2Se3 films grown via PED exhibited high open-circuit voltages (VOC) of around 400 mV but very low short-circuit current densities (JSC). Conversely, RFMS-grown Sb2Se3 films resulted in low VOC values of around 300 mV and higher JSC. To enhance the photocurrent, we employed strategies involving a thin NaF layer to introduce controlled local doping at the back interface and a bilayer p-doped region grown sequentially using PED and RFMS. The optimized Sb2Se3 bilayer solar cell achieved a maximum efficiency of 5.25%.Keywords
Funding Information
- Italian Ministry of the Environment and Energy Security (3277)
- Italian Ministry of University and Research (3277)
- European Union—NextGenerationEU (3277)
This publication has 38 references indexed in Scilit:
- A Perspective of Antimony Chalcogenide Photovoltaics toward CommercializationSolar RRL, 2023
- Solar cell efficiency tables (version 62)Progress in Photovoltaics: Research and Applications, 2023
- Carrier recombination suppression and transport enhancement enable high‐performance self‐powered broadband Sb2Se3 photodetectorsInfoMat, 2023
- Enhanced photocatalytic activity and diode performance of ZnO‐GO nanocomposites via doping with aluminumInternational Journal of Energy Research, 2022
- Sb2Se3 Thin‐Film Solar Cells Exceeding 10% Power Conversion Efficiency Enabled by Injection Vapor Deposition TechnologyAdvanced Materials, 2022
- Ten Years of Sb2Se3 Thin Film Solar CellsSolar RRL, 2022
- Tunable Quasi‐One‐Dimensional Ribbon Enhanced Light Absorption in Sb2Se3Thin‐film Solar Cells Grown by Close‐Space SublimationSolar RRL, 2018
- Low temperature deposition of bifacial CIGS solar cells on Al-doped Zinc Oxide back contactsApplied Surface Science, 2017
- Optical properties and electronic structures of CuSbS2, CuSbSe2, and CuSb(S1−xSex)2 solid solutionphysica status solidi (c), 2017
- Sb2Se3‐Sensitized Inorganic–Organic Heterojunction Solar Cells Fabricated Using a Single‐Source PrecursorAngewandte Chemie, 2013