Development of a Humanoid Shoulder Based on 3-Motor 3 Degrees-of-Freedom Coupled Tendon-Driven Joint Module
- 2 February 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 1105-1111
Abstract
In this study, a new humanoid shoulder is developed using a coupled tendon-driven mechanism that consists of three motors to drive three degrees of freedom (DoFs). In the coupled tendon-driven mechanism, multiple motors simultaneously drive multiple joints with each joint driven by at least two motors coupled with tendons. The torque of a motor is redistributed to multiple joints in a certain proportion to improve the load capacity of the joints. The 3M3D (3-motor 3-DoF) coupled tendon-driven joint module is systematically analyzed and divided into four categories according to the torque transmission characteristics between the motors and the joints: fully routed motor-joint form, 1-unrouted motor-joint form, 2-unrouted motor-joint form, and 3-unrouted motor-joint form. The four categories were analyzed and compared with respect to the characteristics of the motor torque redistribution with different tendon routing forms. The 2-unrouted motor-joint form was adopted for the development of the 3-DoF shoulder joint. The problem of the coexistence of coupling and non-coupling in one joint is solved by introducing a 2-DoF rolling joint. The relationship between the angle and torque between the motors and joints was verified experimentally. The experimental results revealed that the 3M3D coupled tendon-driven shoulder realized torque enhancement effectively by tendon coupling, and the angle accuracy was sufficient as a humanoid shoulder.Keywords
Funding Information
- JSPS KAKENHI (JP18H03761, JP19K14941, JP19K12877)
This publication has 10 references indexed in Scilit:
- Design of a 2 Motor 2 Degrees-of-Freedom Coupled Tendon-driven Joint Module2018
- A 7-Dof Wire-Driven Lightweight Arm with Wide Wrist Motion Range2018
- A motion transmission model for multi-DOF tendon-driven mechanisms with hysteresis and coupling: Application to a da Vinci® instrument2017
- Anthropomorphic Low-Inertia High-Stiffness Manipulator for High-Speed Safe InteractionIEEE Transactions on Robotics, 2017
- Control of a wire-driven 7-DOF arm for miniature humanoid with gravity compensation model2014
- Analysis, Classification, and Design of Tendon-Driven MechanismsIEEE Transactions on Robotics, 2014
- Design and development of a 7-DOF humanoid arm2012
- A General-Purpose 7 DOF Haptic Device: Applications Toward Robot-Assisted SurgeryIEEE/ASME Transactions on Mechatronics, 2007
- Design and control of a seven-degrees-of-freedom manipulator actuated by a coupled tendon-driven system2002
- Age-Related Changes in Normal Isometric Shoulder StrengthThe American Journal of Sports Medicine, 1999