Effect of Chromium Initial State on Microstructure and Properties of Graphene‐Reinforced Copper Matrix Composites
- 25 October 2026
- journal article
- Published by Wiley in Advanced Engineering Materials
Abstract
Graphene is widely used to reinforce copper composites, yet weak interfaces, inefficient stress transfer, and graphene aggregation limit practical performance. Matrix alloying serves as an effective strategy to enhance interfacial bonding; however, the impact of the initial phase state of alloying elements (prealloyed solid solution vs. mechanical mixed powder) on the microstructure and macroscopic properties of composites remains poorly understood. This study employed ball milling and hot pressing/sintering processes to prepare composites with varying graphene contents (0–1 wt.%) using either prealloyed Cu‐2%Cr powder (GA group) or mechanically mixed pure Cu/Cr powder (GM group). Results demonstrated that in the GA group, chromium was uniformly dissolved at the atomic level, enabling superior graphene dispersion with dense interfacial bonding; conversely, in the GM group, chromium existed as micron‐sized discrete particles, leading to poor graphene dispersion. The GA group exhibited significantly better mechanical and electrical properties than the GM group, showing average increases in microhardness and compressive strength by approximately 12.6% and 12.4%, respectively, alongside an 11.1% reduction in resistivity. Compressive strength peaks at 723 MPa (0.5 wt.% graphene) and drops to 207 MPa at 1.0 wt.%. Excessive graphene induces stress concentration and brittle fracture under tight interfaces, revealing strong bonding’s double‐edged sword effect.Keywords
This publication has 26 references indexed in Scilit:
- Fabrication of High‐Performance rGO/Cu Composites via Arc Induction Melting: A Comprehensive Study on Microstructure, Tribological and Electrical PropertiesAdvanced Engineering Materials, 2025
- Interfacial coupling through in-situ fabrication of 3D carbon fiber/Cu compositesJournal of Alloys and Compounds, 2025
- Synergistic strengthening of copper matrix composites with carbides of different aspect ratiosComposites Part A: Applied Science and Manufacturing, 2025
- Designing scheme of compositionally tuned high-strength and high-conductive copper alloy: a systematic phase transformation studyJournal of Materials Science, 2024
- A review on copper alloys with high strength and high electrical conductivityJournal of Alloys and Compounds, 2024
- Graphene-reinforced metal matrix composites: fabrication, properties, and challengesThe International Journal of Advanced Manufacturing Technology, 2023
- Copper matrix composites reinforced by three-dimensional netlike graphene towards enhanced mechanical property and wear resistanceComposites Communications, 2022
- Effect of Cr micro-alloying on microstructure and mechanical properties of alumina whisker and graphene co-reinforced copper matrix compositesJournal of Alloys and Compounds, 2022
- Enhanced Thermal Conductivity and Tensile Strength of Copper Matrix Composite with Few-Layer Graphene NanoplatesJournal of Materials Engineering and Performance, 2021
- Manufacturing and Microstructural Evolution of Mechanuically Alloyed Oxide Dispersion Strengthened SuperalloysAdvanced Engineering Materials, 2001