Numerical Investigation for Selection the Optimal Flexural Strengthening Strategy of Reinforced Concrete Beams
Open Access
- 1 October 2025
- journal article
- Published by Ital Publication in Civil Engineering Journal
- Vol. 11 (10) , 4281-4292
Abstract
Reinforced concrete is the most widespread material that is used in structural applications. In structural systems, concrete beams can become damaged due to aging and increased design loads. Furthermore, for architectural purposes, specific dimensions may be imposed on concrete beams. For these reasons, it always needed to strengthen these beams. In this study, a numerical study was conducted to simulate the strengthening and improving of the flexural strength of reinforced concrete beams using three techniques: carbon fiber (CFRP sheets), steel plate, and external bars. The numerical analysis was verified with previous experimental studies. For the parametric study, the thickness, number of layers, and tensile strength were adopted for the CFRP strengthening technique. For the steel plates, the effect of changing the thickness and number of layers and yield stress was studied. Finally, for the additional external bars, different ratios of longitudinal reinforcement were investigated. After conducting numerical analysis of the studied models, the results showed a clear increase in the ultimate load and stiffness of the beams when strengthened with carbon fiber and steel plate, especially when increasing the tensile strength and yield strength, which was the most influential parameter, compared to a very limited effect of the number of layers due to the separation between the layers, especially for CFRP. However, both strategies showed brittle failure without clear ductility. Using additional external bars or increasing the ratio of longitudinal reinforcement was the most influential strengthening strategy in terms of increasing the beams’ capacity for bending and ductility.Keywords
This publication has 28 references indexed in Scilit:
- State of the art regarding interface bond behavior between FRP and concrete based on cohesive zone modelStructures, 2025
- Experimental and analytical studies on the flexural behavior of steel plate-UHPC composite strengthened RC beamsEngineering Structures, 2023
- Optimal Bedding Selection with the Specific Soil Type According to the Thrust Forces Generated in the Water Distribution Networks Using the Restraining Joint System2022
- Strengthening of reinforced concrete beams by using fiber-reinforced polymer composites: A reviewJournal of Building Engineering, 2019
- Flexural Capacity of Strengthened Reinforced Concrete Beams with Web Bonded Steel PlatesProcedia Engineering, 2017
- Interfacial characterization, control and modification of carbon fiber reinforced polymer compositesComposites Science and Technology, 2015
- Concrete Damage Plasticity Model for Modeling FRP-to-Concrete Bond BehaviorJournal of Composites for Construction, 2015
- Strength and Ductility of Concrete Beams Reinforced with Carbon Fiber-Reinforced Polymer Plates and SteelJournal of Composites for Construction, 2004
- Static and Fatigue Behavior of Reinforced Concrete Beams Strengthened with Steel Plates for FlexureJournal of Structural Engineering, 2003
- Simple dynamic models of elastic–plastic structures under impactInternational Journal of Impact Engineering, 2001