Calibration of Discrete Element Simulation Parameters and Model Construction for the Interaction Between Coastal Saline Alkali Soil and Soil-Engaging Components
Open Access
- 24 December 2024
- journal article
- research article
- Published by MDPI AG in Agriculture
- Vol. 15 (1) , 7
Abstract
There are approximately 36.7 million hectares of saline alkali land available in China. To enhance the comprehensive utilization value of coastal saline alkali land and boost crop yields in such areas, it is essential to conduct research on optimizing the operational performance of high-performance soil contact components in light of the soil characteristics of coastal saline alkali land. Discrete element simulation can be employed to investigate the operational mechanisms of various key components. Nevertheless, at present, there is a dearth of discrete element models for the key physical parameters and soil structure of coastal saline alkali land soil. In this article, typical coastal saline alkali field soil was sampled, and the physical properties of the saline alkali soil, including salt content, moisture content, particle size distribution, and particle size, as well as intrinsic parameters such as soil compaction, density, Poisson’s ratio, and shear modulus, were measured. The Hertz Mindlin with Bonding contact model was employed. Physical experiments on soil accumulation angles at different depths were carried out using the cylindrical lifting method. Subsequently, by means of the discrete element method and the BBD experimental design method, a response surface model was established, and an optimization analysis was performed on the optimal parameters for the soil–soil collision recovery coefficient, static friction coefficient, and dynamic friction coefficient at each depth. Test benches for measuring the collision recovery coefficient, static friction coefficient, and rolling friction coefficient of saline alkali soil at -65Mn were set up, calculation formulas for each parameter were derived, and the contact parameters between soil at different depths and 65Mn were obtained. The results of the sliding friction angle test on different depths of saline alkali soil at -65Mn were further verified using the discrete element method, with a maximum error of 3.11%, which falls within the allowable range. This suggests that the calibration results of the discrete element simulation parameters for the interaction between soil and contact components are reliable, providing data and model support for future research on enhancing the operational performance of high-performance contact components.Keywords
Funding Information
- National Key Research and Development Program of China (2022YFD2300101, SDAIT-03-09, 2021CXGC010813)
- Shandong Provincial Cotton Industry Technology System Innovation Team Machinery Post Expert Project (2022YFD2300101, SDAIT-03-09, 2021CXGC010813)
- Key R&D Program (Major Science and Technology Innovation Project) in Shandong Province (2022YFD2300101, SDAIT-03-09, 2021CXGC010813)
This publication has 11 references indexed in Scilit:
- Calibration of discrete element parameters and experimental verification for modelling subsurface soilsBiosystems Engineering, 2021
- Determination of discrete element model parameters for a cohesive soil and validation through narrow point opener performance analysisSoil and Tillage Research, 2021
- Modelling residue incorporation of selected chisel ploughing tools using the discrete element method (DEM)Soil and Tillage Research, 2020
- Simulation of tillage forces and furrow profile during soil-mouldboard plough interaction using discrete element modellingBiosystems Engineering, 2020
- Key Technologies and Development Modes of Park Energy Internet in Data CentersStrategic Study of CAE, 2020
- Effect of soil particle size on soil-subsoiler interactions using the discrete element method simulationsBiosystems Engineering, 2019
- Modelling approach for soil displacement in tillage using discrete element methodSoil and Tillage Research, 2018
- Three-dimensional discrete element modelling of tillage: Determination of a suitable contact model and parameters for a cohesionless soilBiosystems Engineering, 2014
- A discrete element model for soil–sweep interaction in three different soilsSoil and Tillage Research, 2013
- A modified Drucker-Prager Cap model for die compaction simulation of pharmaceutical powdersInternational Journal of Solids and Structures, 2008