YTYu Tian

Yu Tian

*This is an algorithmically generated author record based on publicly available information.

Yu Tian has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Design and Experimental Research on a Chisel-Type Variable Hierarchical Deep Fertilization Device Suitable for Saline–Alkali Soil

    by Nan Xu, Zhenbo Xin, Jin Yuan, Zenghui Gao, Yu Tian, Chao Xia, Xuemei Liu, Dongwei Wang

    In China, there are around 36.7 million hectares of saline–alkali lands that hold utilization potential. Precision fertilization stands as a vital measure for enhancing the quality of saline–alkali soil and promoting a significant increase in crop yields. The performance of the fertilization device is a decisive factor in determining the effectiveness of fertilization. To optimize the fertilizer utilization rate in coastal saline–alkali soils and substantially reduce fertilizer waste, it is imperative to transport fertilizers to the deep soil layers and execute layered variable-rate fertilization. In light of this, a chisel-type variable-rate layered electronically controlled deep-fertilization device specifically designed for saline–alkali soils has been developed. Extensive experimental research on its fertilization performance has also been carried out. Drawing on the principles of soil dynamics, this paper meticulously investigates the structures of key components and the operating parameters of the fertilization device. Key parameters such as the penetration angle of the fertilizer shovel, the penetration clearance angle, the curvature of the shovel handle, the angle between the fertilizer baffle and the fertilizer pipe wall, the angle between the fertilizer pipe and the horizontal plane, and the forward speed are precisely determined. Moreover, this study explores the quantitative relationship between the fertilizer discharge amount of the fertilizer applicator and the effective working width. Simultaneously, this research mainly focuses on analyzing the impact of the forward speed on the operational effect of layered and variable-rate fertilization. Through a series of field experiments, it was conclusively determined that the optimal fertilization effect was attained when the forward speed was set at 6 km/h. Under this condition, the average deviation in the fertilization amount was merely 2.76%, and the average coefficients of variation in the fertilizer amount uniformity in each soil layer were 7.62, 6.32, 6.06, and 5.65%, respectively. Evidently, the experimental results not only successfully met the pre-set objectives, but also fully satisfied the design requirements. Undoubtedly, this article can offer valuable methodological references for the research and development of fertilization devices tailored for diverse crops cultivated on saline–alkali lands.

  • Open Access

    Design and Optimization of Power Harrow Soil Crushing Components for Coastal Saline–Alkali Land

    by Nan Xu, Zhenbo Xin, Jin Yuan, Zenghui Gao, Yu Tian, Chao Xia, Xuemei Liu, Dongwei Wang

    In China, there are approximately 36.7 million hectares of available saline–alkali land. The quality of land preparation significantly influences the yield of crops grown in saline–alkali soil. However, saline–alkali soil is highly compacted, and, currently, the market lacks land-preparation products specifically tailored to the unique characteristics of saline–alkali land. The soil crushing performance of existing power harrows fails to meet the requirements for high-quality land preparation, thus affecting crop planting yields. Consequently, it is imperative to conduct research on the design and performance improvement of the soil crushing components of power harrows for saline–alkali land. This paper centers on the key soil crushing component, the harrow blade, and conducts research from the perspectives of kinematics and dynamics. Initially, the ranges of key structural and motion parameters are determined, such as the angle of the harrow blade cutting edge, the thickness of the of the harrow blade cutting edge, and the ratio of the circumferential speed to the forward speed. Subsequently, through simulation tests integrating the Discrete Element Method (DEM) and the Box–Behnken Design (BBD), the optimal parameter combination is identified. The impact of the forward speed and the rotational speed of the vertical-shaft rotor on soil disturbance is analyzed. The relationship between soil disturbance and soil heaping is explored, and an optimal forward speed of around 6 km/h is determined. Field tests are conducted to verify the cause of soil heaping. The test results show that the soil crushing rates are all above 85%, with an average soil crushing rate of 88.66%. These test results have achieved the predetermined objectives and meet the design requirements.


  • Open Access

    Calibration of Discrete Element Simulation Parameters and Model Construction for the Interaction Between Coastal Saline Alkali Soil and Soil-Engaging Components

    by Nan Xu, Zhenbo Xin, Jin Yuan, Zenghui Gao, Yu Tian, Chao Xia, Xuemei Liu, Dongwei Wang

    There are approximately 36.7 million hectares of saline alkali land available in China. To enhance the comprehensive utilization value of coastal saline alkali land and boost crop yields in such areas, it is essential to conduct research on optimizing the operational performance of high-performance soil contact components in light of the soil characteristics of coastal saline alkali land. Discrete element simulation can be employed to investigate the operational mechanisms of various key components. Nevertheless, at present, there is a dearth of discrete element models for the key physical parameters and soil structure of coastal saline alkali land soil. In this article, typical coastal saline alkali field soil was sampled, and the physical properties of the saline alkali soil, including salt content, moisture content, particle size distribution, and particle size, as well as intrinsic parameters such as soil compaction, density, Poisson’s ratio, and shear modulus, were measured. The Hertz Mindlin with Bonding contact model was employed. Physical experiments on soil accumulation angles at different depths were carried out using the cylindrical lifting method. Subsequently, by means of the discrete element method and the BBD experimental design method, a response surface model was established, and an optimization analysis was performed on the optimal parameters for the soil–soil collision recovery coefficient, static friction coefficient, and dynamic friction coefficient at each depth. Test benches for measuring the collision recovery coefficient, static friction coefficient, and rolling friction coefficient of saline alkali soil at -65Mn were set up, calculation formulas for each parameter were derived, and the contact parameters between soil at different depths and 65Mn were obtained. The results of the sliding friction angle test on different depths of saline alkali soil at -65Mn were further verified using the discrete element method, with a maximum error of 3.11%, which falls within the allowable range. This suggests that the calibration results of the discrete element simulation parameters for the interaction between soil and contact components are reliable, providing data and model support for future research on enhancing the operational performance of high-performance contact components.