Effect of Surface Roughness on Oxidation Resistance of Stainless Steel AISI 316Ti During Exposure at High Temperature
Open Access
- 11 November 2020
- journal article
- research article
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 29 (12) , 8060-8069
Abstract
In the present work, the influence of surface roughness on oxidation kinetics of AISI 316Ti stainless steel and its consequences in term of oxidation resistance were investigated. Namely, the effect of surface roughness on oxidation resistance was evaluated during different types of cyclic oxidation tests at 900 and 1000 °C. The obtained results revealed that alloy possessing higher surface roughness showed longer lifetime compared to that with lower surface roughness. It was also found that more severe cyclic conditions suppressed the positive effect of surface roughness on sample’s lifetime. The better oxidation resistance of rougher alloy was correlated with suppressed formation of Fe-rich nodules on ground surfaces and explained by the combined effect of introduced defects in the near-surface region and possible increase in residual stresses caused by mechanical surface preparation.Keywords
Funding Information
- Rzeszow University of Technology
This publication has 28 references indexed in Scilit:
- Isothermal and cyclic oxidation behavior of free standing MCrAlY coatings manufactured by high-velocity atmospheric plasma sprayingSurface and Coatings Technology, 2017
- Effect of Surface Roughness on the Oxidation Behavior of a Directionally Solidified Ni-Based Superalloy at 1,100 °CActa Metallurgica Sinica (English Letters), 2015
- Competition between Kirkendall shift and backstress in interdiffusion revisited – simple analytic modelPhilosophical Magazine, 2014
- Oxidation of 316 stainless steel in supercritical waterCorrosion Science, 2009
- Spallation Behavior of Thermally Grown Nickel Oxide on NickelOxidation of Metals, 2009
- Reduction of chromium vaporization from SOFC interconnectors by highly effective coatingsJournal of Power Sources, 2007
- Oxidation of stainless steel under dry and aqueous conditions: oxidation behaviour and compositionSurface and Interface Analysis, 2002
- Internal stress effect on grain-boundary diffusion in submicrocrystalline metalsPhilosophical Magazine Letters, 2000
- Quantitative analysis of oxide films on ODS-alloys using MCs+-SIMS and e-beam SNMSAnalytical and Bioanalytical Chemistry, 1993
- Composition and growth mechanisms of alumina scales on FeCrAl-based alloys determined by SNMSApplied Surface Science, 1991