Evaluation of Polymer-Coated Carbon Nanotube Flexible Microelectrodes for Biomedical Applications
Open Access
- 26 May 2023
- journal article
- research article
- Published by MDPI AG in Bioengineering
- Vol. 10 (6) , 647
Abstract
The demand for electrically insulated microwires and microfibers in biomedical applications is rapidly increasing. Polymer protective coatings with high electrical resistivity, good chemical resistance, and a long shelf-life are critical to ensure continuous device operation during chronic applications. As soft and flexible electrodes can minimize mechanical mismatch between tissues and electronics, designs based on flexible conductive microfibers, such as carbon nanotube (CNT) fibers, and soft polymer insulation have been proposed. In this study, a continuous dip-coating approach was adopted to insulate meters-long CNT fibers with hydrogenated nitrile butadiene rubber (HNBR), a soft and rubbery insulating polymer. Using this method, 4.8 m long CNT fibers with diameters of 25–66 µm were continuously coated with HNBR without defects or interruptions. The coated CNT fibers were found to be uniform, pinhole free, and biocompatible. Furthermore, the HNBR coating had better high-temperature tolerance than conventional insulating materials. Microelectrodes prepared using the HNBR-coated CNT fibers exhibited stable electrochemical properties, with a specific impedance of 27.0 ± 9.4 MΩ µm2 at 1.0 kHz and a cathodal charge storage capacity of 487.6 ± 49.8 mC cm−2. Thus, the developed electrodes express characteristics that made them suitable for use in implantable medical devices for chronic in vivo applications.Keywords
Funding Information
- National Institutes of Health (R21 NS125461-01)
This publication has 85 references indexed in Scilit:
- Carbon nanotube-based multi electrode arrays for neuronal interfacing: progress and prospectsFrontiers in Neural Circuits, 2013
- Ultrasmall implantable composite microelectrodes with bioactive surfaces for chronic neural interfacesNature Materials, 2012
- Highly stable carbon nanotube doped poly(3,4-ethylenedioxythiophene) for chronic neural stimulationBiomaterials, 2011
- Electrochemical Charge Storage Properties of Vertically Aligned Carbon Nanotube Films: The Activation-Enhanced Length EffectJournal of the Electrochemical Society, 2011
- Carbon Microelectrodes with a Renewable SurfaceAnalytical Chemistry, 2010
- Conducting‐Polymer Nanotubes Improve Electrical Properties, Mechanical Adhesion, Neural Attachment, and Neurite Outgrowth of Neural ElectrodesSmall, 2010
- Improvement of metal and tissue adhesion on surface‐modified parylene CJournal of Biomedical Materials Research Part A, 2008
- Fourier transform raman spectroscopy of elastomers: An overviewSpectrochimica Acta Part A: Molecular Spectroscopy, 1990
- The adhesion of glow-discharge polymers, Silastic and Parylene to implantable platinum electrodes: results of tensile pull tests after exposure to isotonic sodium chlorideBiomaterials, 1981
- Stretching and deformation vibrations of CH2, C(CH3) and O(CH3) groups of poly(methyl methacrylate)Polymer, 1979