Abstract
A front-side illuminated array of 50×40 Single-Photon Avalanche Diode pixels for single point distance measurement is implemented in a 0.15 μm CMOS technology, showing a pixel size of 38.5×33.5 μm2 with variable fill factor from 4.8% to 15.3%. In order to improve the signal to background ratio, the sensor embeds a procedure for on-the-fly identification of the laser spot position in the active area. A programmable 5×5 Region-of-Interest can be connected, through a reconfigurable switching matrix, to 25 TDCs with 11-bit and 48ps resolution for timing measurement. Thanks to the adopted approach, the detector, working with a 650 nm pulsed laser with an average power of just 40 μW, can reliably measure up to 7.5 m achieving a best precision lower than 1.6 mm at 3 m and working under 7 klux background at 1kHz rate. The sensor is shown to work up to 18klux of background light with best precision lower than 4 mm at 3m.