Nicola Massari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nicola Massari has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Leonardo Gasparini
Fondazione Bruno Kessler, Trento, Italy
5 shared publications - Luca Parmesan
IRIS, Fondazione Bruno Kessler (FBK), Povo, Trento, Italy
4 shared publications - Alessandro Tontini
IRIS, Fondazione Bruno Kessler (FBK), Povo, Trento, Italy
3 shared publications David Stoppa
Fondazione Bruno Kessler, and also with the AMS
3 shared publications- Massimo Gottardi
Fondazione Bruno Kessler, Sensors and Devices, IRIS
3 shared publications - Matteo Perenzoni
Fondazione Bruno Kessler, Trento, Italy
3 shared publications
Latest Publications
- 16 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. PP (15498328) , 1-14
A Fully Integrated Quantum Random Number Generator for Cryptographic Application
A compact quantum random number generator (QRNG) based on an array of Single Photon Avalanche Diodes (SPADs) is presented here. The main feature of the proposed chip is the capability to generate random numbers without the use of any external source of light. In this view, SPADs are configured to be used in two ways: 1) as a controlled light emitter and 2) as a detector. An embedded logic is able to distinguish dark events against detected emitted photon in such a way to make the system sensitive only to the presence of light. The extracted random bits show a uniform distribution and the QRNG, thanks to an integrated conditioning block maximizing the output entropy, eventually passes all AIS31 tests. The average raw bit rate in the default device configuration (one enabled column) is measured equal to 800 kbps.
- 16 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. PP (15498328) , 1-14
A Fully Integrated Quantum Random Number Generator for Cryptographic Application
A compact quantum random number generator (QRNG) based on an array of Single Photon Avalanche Diodes (SPADs) is presented here. The main feature of the proposed chip is the capability to generate random numbers without the use of any external source of light. In this view, SPADs are configured to be used in two ways: 1) as a controlled light emitter and 2) as a detector. An embedded logic is able to distinguish dark events against detected emitted photon in such a way to make the system sensitive only to the presence of light. The extracted random bits show a uniform distribution and the QRNG, thanks to an integrated conditioning block maximizing the output entropy, eventually passes all AIS31 tests. The average raw bit rate in the default device configuration (one enabled column) is measured equal to 800 kbps.
- Open Access
- 1 June 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (06) , C06078
Particam: a fully digital sensor for sub micron resolution
While silicon industry advances to smaller and smaller feature sizes, silicon particle detectors struggle to follow that miniaturisation. One of the main bottlenecks are the relatively large transistors required for the optimal performance of the analogue frontend. Particam instead uses a digital-only approach which is focused on digital storage cells switching due to transient radiation (Single Event Upset (SEU)). Typically, great effort is expended to prevent SEUs from affecting the registers of any ASIC, but designs can also be optimised in the opposite way. With a pixel being little more than a memory cell it can be designed with close to minimum feature size with very few transistors allowing pixel pitches of a few microns. A proof-of-principle demonstrator with different pixel flavours with pitches ranging from 6.5 µm to 2 µm has been produced in the UMC 65 nm process. Test pulse measurements show the circuits work as intended, however the charge collection was found to be insufficient for most types of ionising radiation besides alpha particles. Results of this prototype are presented. Plans for further developments and possible applications are discussed.
- 1 June 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (06) , C06078
Open AccessParticam: a fully digital sensor for sub micron resolution
While silicon industry advances to smaller and smaller feature sizes, silicon particle detectors struggle to follow that miniaturisation. One of the main bottlenecks are the relatively large transistors required for the optimal performance of the analogue frontend. Particam instead uses a digital-only approach which is focused on digital storage cells switching due to transient radiation (Single Event Upset (SEU)). Typically, great effort is expended to prevent SEUs from affecting the registers of any ASIC, but designs can also be optimised in the opposite way. With a pixel being little more than a memory cell it can be designed with close to minimum feature size with very few transistors allowing pixel pitches of a few microns. A proof-of-principle demonstrator with different pixel flavours with pitches ranging from 6.5 µm to 2 µm has been produced in the UMC 65 nm process. Test pulse measurements show the circuits work as intended, however the charge collection was found to be insufficient for most types of ionising radiation besides alpha particles. Results of this prototype are presented. Plans for further developments and possible applications are discussed.
- 12 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 241-244
A novel fully digital particle detector with high spatial resolution
In the presented paper we describe an innovative pixel topology designed for particle tracking. The proposed approach is based on a fully digital concept. When ionising particles traverse detector material, charges collected by the pixel are converted to a single bit to obtain a binary image. This digital approach allows a simplified pixel schematic to be used, reducing the pixel size to 2.5 μm × 2.5 μm and optimises the power consumption and the speed of the readout. An array of 256×256 pixels have been fabricated in a 65 nm standard CMOS technology as a proof of concept. Preliminary results on pixel performance are reported, demonstrating the potential of the approach.
- 12 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 241-244
A novel fully digital particle detector with high spatial resolution
In the presented paper we describe an innovative pixel topology designed for particle tracking. The proposed approach is based on a fully digital concept. When ionising particles traverse detector material, charges collected by the pixel are converted to a single bit to obtain a binary image. This digital approach allows a simplified pixel schematic to be used, reducing the pixel size to 2.5 μm × 2.5 μm and optimises the power consumption and the speed of the readout. An array of 256×256 pixels have been fabricated in a 65 nm standard CMOS technology as a proof of concept. Preliminary results on pixel performance are reported, demonstrating the potential of the approach.
- Open Access
- 1 October 2020
- Published by AIP Publishing in APL Photonics
- Vol. 5 (10) , 101301
An optical chip for self-testing quantum random number generation
We present an implementation of a semi-device-independent protocol of the generation of quantum random numbers in a fully integrated silicon chip. The system is based on a prepare-and-measure scheme, where we integrate a partially trusted source of photons and an untrusted single photon detector. The source is a silicon photomultiplier, which emits photons during the avalanche impact ionization process, while the detector is a single photon avalanche diode. The proposed protocol requires only a few and reasonable assumptions on the generated states. It is sufficient to measure the statistics of generation and detection in order to evaluate the min-entropy of the output sequence, conditioned on all possible classical side information. We demonstrate that this protocol, previously realized with a bulky laboratory setup, is totally applicable to a compact and fully integrated chip with an estimated throughput of 6 kHz of the certified quantum random bit rate.
- 1 October 2020
- Published by AIP Publishing in APL Photonics
- Vol. 5 (10) , 101301
Open AccessAn optical chip for self-testing quantum random number generation
We present an implementation of a semi-device-independent protocol of the generation of quantum random numbers in a fully integrated silicon chip. The system is based on a prepare-and-measure scheme, where we integrate a partially trusted source of photons and an untrusted single photon detector. The source is a silicon photomultiplier, which emits photons during the avalanche impact ionization process, while the detector is a single photon avalanche diode. The proposed protocol requires only a few and reasonable assumptions on the generated states. It is sufficient to measure the statistics of generation and detection in order to evaluate the min-entropy of the output sequence, conditioned on all possible classical side information. We demonstrate that this protocol, previously realized with a bulky laboratory setup, is totally applicable to a compact and fully integrated chip with an estimated throughput of 6 kHz of the certified quantum random bit rate.
- 11 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 3, 406-409
Luximos: A 768×64 900-fps Tileable Pipelined X-Ray CMOS Image Sensor for Dental Imaging With 2.6 LSB/nGy Sensitivity
In this paper a stitched array of 768x64 pixels for X-ray dental imaging is presented. The sensor architecture allows to increase the frame rate up to 900 fps thanks to a pipeline approach that minimizes the deadtime between consecutive frames. A column-based ADC converts pixel values in digital form while an external FPGA performs the operation of TDI accumulation, thus increasing the SNR. Internal programmable gain allows to achieve a maximum sensitivity of 2.6 LSB/nGy and, at the same time, to extend the dynamic range of the sensor in case of high intensity. The final system consists of two sensors each one having a size of 74.5x9 mm, assembled in a PCB and coupled with a high sensitive columnar thallium-doped cesium iodide (CsI(Tl)) scintillator for X-ray conversion. The sensor, fabricated in a standard CMOS 0.15 μm technology with stitching approach, shows a pixel size of 97 μm.
- 11 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 3, 406-409
Luximos: A 768×64 900-fps Tileable Pipelined X-Ray CMOS Image Sensor for Dental Imaging With 2.6 LSB/nGy Sensitivity
In this paper a stitched array of 768x64 pixels for X-ray dental imaging is presented. The sensor architecture allows to increase the frame rate up to 900 fps thanks to a pipeline approach that minimizes the deadtime between consecutive frames. A column-based ADC converts pixel values in digital form while an external FPGA performs the operation of TDI accumulation, thus increasing the SNR. Internal programmable gain allows to achieve a maximum sensitivity of 2.6 LSB/nGy and, at the same time, to extend the dynamic range of the sensor in case of high intensity. The final system consists of two sensors each one having a size of 74.5x9 mm, assembled in a PCB and coupled with a high sensitive columnar thallium-doped cesium iodide (CsI(Tl)) scintillator for X-ray conversion. The sensor, fabricated in a standard CMOS 0.15 μm technology with stitching approach, shows a pixel size of 97 μm.
- 30 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 3, 86-89
A Fast 50 × 40-Pixels Single-Point DTOF SPAD Sensor With Photon Counting and Programmable ROI TDCs, With σ <4 mm at 3 m up to 18 klux of Background Light
A front-side illuminated array of 50×40 Single-Photon Avalanche Diode pixels for single point distance measurement is implemented in a 0.15 μm CMOS technology, showing a pixel size of 38.5×33.5 μm2 with variable fill factor from 4.8% to 15.3%. In order to improve the signal to background ratio, the sensor embeds a procedure for on-the-fly identification of the laser spot position in the active area. A programmable 5×5 Region-of-Interest can be connected, through a reconfigurable switching matrix, to 25 TDCs with 11-bit and 48ps resolution for timing measurement. Thanks to the adopted approach, the detector, working with a 650 nm pulsed laser with an average power of just 40 μW, can reliably measure up to 7.5 m achieving a best precision lower than 1.6 mm at 3 m and working under 7 klux background at 1kHz rate. The sensor is shown to work up to 18klux of background light with best precision lower than 4 mm at 3m.
- 30 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 3, 86-89
A Fast 50 × 40-Pixels Single-Point DTOF SPAD Sensor With Photon Counting and Programmable ROI TDCs, With σ <4 mm at 3 m up to 18 klux of Background Light
A front-side illuminated array of 50×40 Single-Photon Avalanche Diode pixels for single point distance measurement is implemented in a 0.15 μm CMOS technology, showing a pixel size of 38.5×33.5 μm2 with variable fill factor from 4.8% to 15.3%. In order to improve the signal to background ratio, the sensor embeds a procedure for on-the-fly identification of the laser spot position in the active area. A programmable 5×5 Region-of-Interest can be connected, through a reconfigurable switching matrix, to 25 TDCs with 11-bit and 48ps resolution for timing measurement. Thanks to the adopted approach, the detector, working with a 650 nm pulsed laser with an average power of just 40 μW, can reliably measure up to 7.5 m achieving a best precision lower than 1.6 mm at 3 m and working under 7 klux background at 1kHz rate. The sensor is shown to work up to 18klux of background light with best precision lower than 4 mm at 3m.
- 27 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 26 (3) , 1-8
Structures and Methods for Fully-Integrated Quantum Random Number Generators
Different electronic devices nowadays exploit random number generators either to create the seed for simulations, for gaming or to encrypt the communications. Particularly for cryptography applications, there is an increasing effort to realize a truly random number generator, based not on mathematical algorithms but exploiting randomness of physical processes. Among them quantum processes, provide intrinsic unpredictability, for example exploiting the arrival time, the number or the properties of photons. In this work we focus on photonic quantum random number generator (QRNG), and we analyze different approaches and different extraction methods to realize a fully integrated, CMOS compatible, QRNG with photon-emitter realized on the same chip and very close to the detectors of single photons. Non-idealities of the emitter and the detector have to be studied and depends on the structure. They can be mitigated with robust extraction methods which however should not introduce complex algorithms or secondary entropy sources that can make the device no more quantum based. The ultimate goal is to realize a CMOS building block that can be implemented as building block, with low power consumption and robust to environment conditions.
- 27 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 26 (3) , 1-8
Structures and Methods for Fully-Integrated Quantum Random Number Generators
Different electronic devices nowadays exploit random number generators either to create the seed for simulations, for gaming or to encrypt the communications. Particularly for cryptography applications, there is an increasing effort to realize a truly random number generator, based not on mathematical algorithms but exploiting randomness of physical processes. Among them quantum processes, provide intrinsic unpredictability, for example exploiting the arrival time, the number or the properties of photons. In this work we focus on photonic quantum random number generator (QRNG), and we analyze different approaches and different extraction methods to realize a fully integrated, CMOS compatible, QRNG with photon-emitter realized on the same chip and very close to the detectors of single photons. Non-idealities of the emitter and the detector have to be studied and depends on the structure. They can be mitigated with robust extraction methods which however should not introduce complex algorithms or secondary entropy sources that can make the device no more quantum based. The ultimate goal is to realize a CMOS building block that can be implemented as building block, with low power consumption and robust to environment conditions.
- 3 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 66 (12) , 2067-2071
SPAD-Based Quantum Random Number Generator With an $N^{\rm{th}}$ -Order Rank Algorithm on FPGAWe present a compact, all-solid-state, low-cost quantum random number generator (QRNG) based on a Single-Photon Avalanche Diode (SPAD) and a Field Programmable Gate Array (FPGA). A new algorithm for random bit generation is described, ranking the inter-arrival times of a group of M photons detected by the SPAD device, and processed directly on the FPGA. The proposed approach improves the efficiency of generated random bits per detected photon, spanning from 0.5 bits/photon in case of 0 order rank, up to 0.875 bits/photon for 2nd order rank. By extending the algorithm to higher orders, the proposed system approaches the maximum theoretical value of 1.0 bit/photon. The rate of generation of random numbers is limited by the SPAD minimum deadtime, achieving an experimentally proven bit rate of 7.3 Mbps. The standard randomness statistical tests are passed for a wide range of photon fluxes and for all the implemented rank orders with no additional post-processing on the generated sequence.
- 3 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 66 (12) , 2067-2071
SPAD-Based Quantum Random Number Generator With an $N^{\rm{th}}$ -Order Rank Algorithm on FPGAWe present a compact, all-solid-state, low-cost quantum random number generator (QRNG) based on a Single-Photon Avalanche Diode (SPAD) and a Field Programmable Gate Array (FPGA). A new algorithm for random bit generation is described, ranking the inter-arrival times of a group of M photons detected by the SPAD device, and processed directly on the FPGA. The proposed approach improves the efficiency of generated random bits per detected photon, spanning from 0.5 bits/photon in case of 0 order rank, up to 0.875 bits/photon for 2nd order rank. By extending the algorithm to higher orders, the proposed system approaches the maximum theoretical value of 1.0 bit/photon. The rate of generation of random numbers is limited by the SPAD minimum deadtime, achieving an experimentally proven bit rate of 7.3 Mbps. The standard randomness statistical tests are passed for a wide range of photon fluxes and for all the implemented rank orders with no additional post-processing on the generated sequence.
- 5 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (18) , 3843-3854
Model, Validation, and Characterization of a Robust Quantum Random Number Generator Based on Photon Arrival Time Comparison
A Quantum Random Number Generator (QRNG) based on the detection of the arrival time of photons is presented. A stochastic model of the QRNG prototype is derived, showing its consistency with output data sets, in order to estimate the entropy produced by the device. Experimental data, in accord with the model, demonstrates the robustness of the approach versus possible variations of external parameters such as temperature or intensity of the light.
- 5 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (18) , 3843-3854
Model, Validation, and Characterization of a Robust Quantum Random Number Generator Based on Photon Arrival Time Comparison
A Quantum Random Number Generator (QRNG) based on the detection of the arrival time of photons is presented. A stochastic model of the QRNG prototype is derived, showing its consistency with output data sets, in order to estimate the entropy produced by the device. Experimental data, in accord with the model, demonstrates the robustness of the approach versus possible variations of external parameters such as temperature or intensity of the light.
- 24 August 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 63 (1) , 145-152
Linear-Mode Gain-Modulated Avalanche Photodiode Image Sensor for Time-of-Flight Optical Ranging
In this paper, a CMOS image sensor based on avalanche photodiodes (APDs) for time-of-flight optical ranging is presented. In-pixel phase-sensitive detection was obtained thanks to the modulation of APD avalanche gain. A pixel based on this principle with 30-μm pixel pitch and 25.7% fill factor was designed, and a 64 × 64 APD image sensor was fabricated in a 0.35-μm standard CMOS process. The maximum demodulation contrast measured on the array exceeds 85% at 25-MHz modulation frequency. High-frequency modulation was demonstrated on single test pixels, where a demodulation contrast as high as 80% was measured at 200-MHz modulation frequency. A 3-D camera working at a frame rate up to 200 frames/s was realized and characterized.
- 24 August 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 63 (1) , 145-152
Linear-Mode Gain-Modulated Avalanche Photodiode Image Sensor for Time-of-Flight Optical Ranging
In this paper, a CMOS image sensor based on avalanche photodiodes (APDs) for time-of-flight optical ranging is presented. In-pixel phase-sensitive detection was obtained thanks to the modulation of APD avalanche gain. A pixel based on this principle with 30-μm pixel pitch and 25.7% fill factor was designed, and a 64 × 64 APD image sensor was fabricated in a 0.35-μm standard CMOS process. The maximum demodulation contrast measured on the array exceeds 85% at 25-MHz modulation frequency. High-frequency modulation was demonstrated on single test pixels, where a demodulation contrast as high as 80% was measured at 200-MHz modulation frequency. A 3-D camera working at a frame rate up to 200 frames/s was realized and characterized.