Parametric Analysis of Compression Ratio Variation Effects on Thermodynamic, Gaseous Pollutant and Particle Emissions of a Dual-Fuel CH 4 -Diesel Light Duty Engine
- 28 March 2017
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
The paper reports the results of an experimental campaign aimed to assess the impact of the compression ratio (CR) variation on the performance and pollutant emissions, including the particle size spectrum, of a single cylinder research engine (SCE), representatives of the engine architectures for automotive application, operated in dual-fuel methane-diesel mode. Three pistons with different bowl volumes corresponding to CR values of 16.5, 15.5 and 14.5 were adopted for the whole test campaign. The injection strategy was based on two injection pulses per cycle, as conventionally employed for diesel engines. The test methodology per each CR included the optimization of both 1st injection pulse quantity and intake air mass flow rate in order to lower as much as possible the unburned methane emissions (MHC). The testing points were selected in order to analyse the CR impact on SCE performance at partial and high loads, including the performance estimation over the New European Driving emission homologation Cycle (NEDC) of a real four-cylinder automotive multi-cylinder engine.The results evidence benefits on combustion noise, MHC and particle size spectrum when lowering the CR in DF mode. However, with respect to the tested engine class, a CR of 15.5 appears to be the best compromise among energy efficiency and global pollutant emissions.Keywords
This publication has 28 references indexed in Scilit:
- Study of a new mechanical variable valve actuation system: Part II—estimation of the actual fuel consumption improvement through one-dimensional fluid dynamic analysis and valve train friction estimationInternational Journal of Engine Research, 2015
- Parametric investigation of natural gas port injection and diesel pilot injection on the combustion and emissions of a turbocharged common rail dual-fuel engine at low loadApplied Energy, 2015
- Review of high efficiency and clean reactivity controlled compression ignition (RCCI) combustion in internal combustion enginesProgress in Energy and Combustion Science, 2015
- Study of a new mechanical variable valve actuation system: Part I—valve train design and friction modelingInternational Journal of Engine Research, 2014
- Effects of pilot fuel quantity on the emissions characteristics of a CNG/diesel dual fuel engine with optimized pilot injection timingApplied Energy, 2013
- Effect of Port Injected Ethanol on Combustion Characteristics in a Dual-Fuel Light Duty Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 2013
- Feasibility Study of Exhaust Emissions in a Natural Gas Diesel Dual Fuel (DDF) EngineSAE International Journal of Advances and Current Practices in Mobility, 2012
- Low Cetane Number Renewable Oxy-fuels for Premixed Combustion Concept Application: Experimental Investigation on a Light Duty Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 2012
- Assessment of the Effect of Low Cetane Number Fuels on a Light Duty CI Engine: Preliminary Experimental Characterization in PCCI Operating ConditionSAE International Journal of Advances and Current Practices in Mobility, 2011
- Emission characteristics of high speed, dual fuel, compression ignition engine operating in a wide range of natural gas/diesel fuel proportionsFuel, 2010