A method to generate conformal finite‐element meshes from 3D measurements of microstructurally small fatigue‐crack propagation
- 27 April 2016
- journal article
- research article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 39 (6) , 737-751
Abstract
In an effort to reproduce computationally the observed evolution of microstructurally small fatigue cracks (MSFCs), a method is presented for generating conformal, finite‐element (FE), volume meshes from 3D measurements of MSFC propagation. The resulting volume meshes contain traction‐free surfaces that conform to incrementally measured 3D crack shapes. Grain morphologies measured using near‐field high‐energy X‐ray diffraction microscopy are also represented within the FE volume meshes. Proof‐of‐concept simulations are performed to demonstrate the utility of the mesh‐generation method. The proof‐of‐concept simulations employ a crystal‐plasticity constitutive model and are performed using the conformal FE meshes corresponding to successive crack‐growth increments. Although the simulations for each crack increment are currently independent of one another, they need not be, and transfer of material‐state information among successive crack‐increment meshes is discussed. The mesh‐generation method was developed using post‐mortem measurements, yet it is general enough that it can be applied to in‐situ measurements of 3D MSFC propagation.Keywords
Funding Information
- Air Force Office of Scientific Research Young Investigator Program (FA9550-15-1-0172)
- National Science Foundation Graduate Research Fellowship Program (DGE-0707428)
- the U.S. Department of Energy (DOE) by Lawrence Livermore National Laboratory (DE-AC52-07NA27344)
- DOE/BES (DESC0002001)
This publication has 32 references indexed in Scilit:
- A geometric approach to modeling microstructurally small fatigue crack formation: III. Development of a semi-empirical model for nucleationModelling and Simulation in Materials Science and Engineering, 2011
- Microstructure-sensitive computational modeling of fatigue crack formationInternational Journal of Fatigue, 2010
- A perspective on trends in multiscale plasticityInternational Journal of Plasticity, 2010
- A geometric approach to modeling microstructurally small fatigue crack formation: II. Physically based modeling of microstructure-dependent slip localization and actuation of the crack nucleation mechanism in AA 7075-T651Modelling and Simulation in Materials Science and Engineering, 2010
- The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metalsInternational Journal of Plasticity, 2009
- A geometric approach to modeling microstructurally small fatigue crack formation: I. Probabilistic simulation of constituent particle cracking in AA 7075-T651Modelling and Simulation in Materials Science and Engineering, 2008
- Microstructure-based multistage fatigue modeling of aluminum alloy 7075-T651Engineering Fracture Mechanics, 2007
- Predicting fatigue crack initiation through image-based micromechanical modelingActa Materialia, 2007
- Experimental and computational studies of low cycle fatigue crack nucleation in a polycrystalInternational Journal of Plasticity, 2007
- Microstructure-based fatigue modeling of cast A356-T6 alloyEngineering Fracture Mechanics, 2003